2
SAFETY
SAFETY
Safety is a combination of common sense, staying alert
and knowing how your item works. SAVE THESE
SAFETY INSTRUCTIONS.
WARNING — To reduce the risk of injury, user must
read and understand operator’s manual.
WARNING — To avoid mistakes and serious injury, do
not use this tool until the following steps
have been read and understood.
1.
READ and become familiar with this entire instruction
manual. LEARN the tool’s applications, limitations, and
possible hazards.
2.
AVOID DANGEROUS CONDITIONS. Do not use in wet
or damp areas or expose them to rain. Keep work areas
well lit.
3.
DO NOT use in the presence of flammable liquids
or gases.
4.
DO NOT direct the tool at any bystanders.
5.
KEEP BYSTANDERS AT A SAFE DISTANCE from the
work area, especially when the tool is operating. NEVER
allow children or pets near the tool.
6.
DO NOT FORCE THE TOOL to do a job for which it was
not designed.
7.
DRESS FOR SAFETY. Do not wear loose clothing,
gloves, neckties, or jewelry (rings, watches, etc.) when
operating the tool. Inappropriate clothing and items can
get caught in moving parts and draw you in. ALWAYS
wear non-slip footwear and tie back long hair.
8.
WEAR A FACE MASK OR DUST MASK if working in
dusty or dirty conditions.
9.
ALWAYS remove the battery from the tool when making
adjustments, changing parts, cleaning, or working on
the tool.
10.
AVOID ACCIDENTAL START-UPS. Make sure the
power switch is in the OFF position before inserting
the battery.
11.
REMOVE ADJUSTMENT TOOLS. Always make sure
all adjustment tools are removed from the tool before
turning it on.
12.
NEVER LEAVE A RUNNING TOOL UNATTENDED.
Turn the power switch OFF. Do not leave the tool until it
has come to a complete stop.
13.
NEVER STAND ON A TOOL. Serious injury could
result if the tool tips or is accidentally hit. DO NOT store
anything above or near the tool.
14.
DO NOT OVERREACH. Keep proper footing and
balance at all times. Wear oil-resistant rubber-soled
footwear. Keep the floor clear of oil, scrap, and
other debris.
15.
WEAR NECESSARY hand and hearing protection.
Wear no-slip heavy duty work gloves and hearing
protection to prevent injury.
16.
MAINTAIN TOOLS PROPERLY. ALWAYS keep tools
clean and in good working order. Follow instructions for
lubricating and changing accessories.
17.
CHECK FOR DAMAGED PARTS. Check for alignment
of moving parts, jamming, breakage, improper
mounting, or any other conditions that may affect the
tool’s operation. Any part that is damaged should be
properly repaired or replaced before use.
18.
DO NOT operate the tool if you are under the influence
of drugs, alcohol, or medication that may affect your
ability to properly use the tool.
19.
USE SAFETY GOGGLES AT ALL TIMES that comply
with ANSI Z87.1. Normal safety glasses only have
impact resistant lenses and are not designed for safety.
Wear a face or dust mask when working in a
dusty environment.
20.
Use ear protection such as plugs or muffs during
extended periods of operation.
!
!
