background image

2

WWW.SENIXTOOLS.COM

CONTENTS/TECHNICAL DATA

The purpose of safety symbols is to attract your 

attention to possible dangers. The safety symbols, 

and their explanations, deserve your careful attention 

and understanding. The safety warnings do not by 

themselves eliminate any danger. The instructions or 

warnings they give are not substitutes for proper accident 

prevention measures.

 DANGER: 

Signals an EXTREME 

hazard. Failure to obey a safety 

DANGER

 symbol 

WILL

 

result in serious injury or death to yourself or to others.

 WARNING: 

Crude oil, gasoline, diesel 

fuel and other petroleum products can expose you to 

chemicals including toluene and benzene, which are 

known to the State of California to cause cancer and birth 

defects or other reproductive harm. These exposures can 

occur in and around oil fields, refineries, chemical plants, 

transport and storage operations such as pipelines, 

marine terminals, tank trucks and other facilities and 

equipment.  For more information go to:  

www.P65Warnings.ca.gov/petroleum.

 WARNING: 

Signals a SERIOUS 

hazard. Failure to obey a safety 

WARNING

 symbol 

CAN

 

result in serious injury to yourself or to others.

TECHNICAL DATA

Model Number:

BL4QL-L

Engine Type:

Air-Cooled, 4-Cycle

Displacement:

1.62 cu in. (26.5 cc)

Spark Plug Gap:

0.025 in. - 0.31 in. (0.6 - 0.8 mm)

Lubrication:

SAE 30 Oil

Crankcase 

Lubrication 

Capacity:

2.03 oz. (60 ml)

Fuel Tank Capacity:

9.47 oz. (280 ml)

Approximate unit 

weight (no fuel): 

9.26 lbs. (4.2 kg)

Air Blowing Speed:

125 MPH (55 m/s)

Volume of Air 

Moved:

410 CFM (697 m

3

/h)

 CAUTION:

 

Signals a MODERATE 

hazard. Failure to obey a safety 

CAUTION

 symbol 

MAY

 

result in property damage or injury to yourself or to 

others.

Note: 

Advises you of information or instructions vital to the 

operation or maintenance of the equipment.

SPARK ARRESTOR NOTE
NOTE: For users on U.S. Forest Land and in the states 

of California, Maine, Oregon and Washington. 

All U.S. 

Forest Land and the state of California (Public Resources 

Codes 4442 and 4443), Oregon and Washington require, 

by law that certain internal combustion engines operated 

on forest brush and/or grass-covered areas be equipped 

with a spark arrestor, maintained in effective working order, 

or the engine be constructed, equipped and maintained 

for the prevention of fire. Check with your state or local 

authorities for regulations pertaining to these requirements. 

Failure to follow these requirements could subject you to 

liability or a fine. This unit is factory equipped with a spark 

arrestor. If it requires replacement, contact a Sears Parts 

& Repair Service Center to install the appropriate muffler 

assembly. For location and purchase information call 

1-888-331-4569.

CALIFORNIA PROPOSITION 65

 WARNING: 

This product contains 

a chemical known to the state of California to cause 

cancer, birth defects or other reproductive harm.

Read the operator’s manual and follow all warnings 

and safety instructions. Failure to do so can result in 

serious injury to the operator and/or bystanders.

CONTENTS

TECHNICAL DATA ��������������������������������������������������������������������������������������������� 2
IMPORTANT SAFETY INSTRUCTIONS ����������������������������������������������������������� 3
SAFETY & INTERNATIONAL SYMBOLS ���������������������������������������������������������� 5
USING THE RIGHT OIL ������������������������������������������������������������������������������������ 8
USING THE RIGHT FUEL ��������������������������������������������������������������������������������� 8
FUELING THE UNIT ������������������������������������������������������������������������������������������ 9
STARTING AND STOPPING ��������������������������������������������������������������������������� 10
HOLDING THE UNIT ��������������������������������������������������������������������������������������� 11
TIPS FOR BEST RESULTS ����������������������������������������������������������������������������� 11
CHECKING THE OIL LEVEL ��������������������������������������������������������������������������� 12
MAINTENANCE SCHEDULE �������������������������������������������������������������������������� 12
CHANGING THE OIL ��������������������������������������������������������������������������������������� 13
MAINTAINING THE AIR FILTER ��������������������������������������������������������������������� 13
ADJUSTING THE IDLE SPEED ���������������������������������������������������������������������� 14
MAINTAINING THE SPARK PLUG ������������������������������������������������������������������ 14
CLEANING AND STORAGE ��������������������������������������������������������������������������� 15
TROUBLESHOOTING ������������������������������������������������������������������������������������� 16
PARTS ������������������������������������������������������������������������������������������������������������� 17
WARRANTY ���������������������������������������������������������������������������������������������������� 19

Summary of Contents for BL4QL-L





















Reviews: