3MTS
: Operation Manual
3MTS_OPMANUAL_EN_20180212_V.3.1.DOCX
17
Language
Use the World button to change the
language of the software.
Window size
Use the "Window Size" button to
adjust the size of the display
elements.
Information
Use the "Info" button to access the
information page
Close
Exits the software
4.3.2 Measurement Display
Display for each measured component (3):
-
BTotal (total magnetic field value)
-
Bx
(X-axis measured by Hall probe)
-
By
(Y-axis measured by Hall probe)
-
Bz
(Z-axis measured by Hall probe)
-
T Temperature of the probe
The instantaneous measured value (2) with its corresponding Offset value (1) is shown. The offset
value is displayed only after an offset has been performed. This is done via the "Offset" button in the
menu bar. In this case, the current measured value (2) becomes the offset value (4) and the
measured value is set to zero (5)
1
2
3
4
5
6
Figure 14: 3MTS Software – Values