6.
Open the Pulse application, and a 'Welcome' page appears. Select Pulse Link and
the Pulse App will search and connect to the Pulse Link automatically. The wizard
guides you through the steps for connecting your portable smart device to the
Pulse Link. If the application doesn't detect the Pulse Link, restart the application
and setup wizard again.
7.
Once the portable device has been successfully connected to the Pulse Link, the
application will display the main control screen. Press the 'Lights' or 'Sounds' tab
to switch between them and achieve different functions, such as Light Brightness
& Settings, Sound Volume & Settings, and Equalizer (EQ) Settings etc.
To add a new Satellite bulb to the Pulse Link
1.
Successfully configure Pulse Link (C01-BR30) and the current Satellite bulbs
before installing a new Satellite bulb.
2.
On your smart device, turn on Bluetooth and connect to the Pulse Link.
3.
Install the new Satellite bulb in the proper light socket.
4.
Turn on the new Satellite bulb.
5.
Launch the Pulse App on your device
6.
Select one of two methods to add the Pulse Satellite bulb to the Pulse Link
network:
i.
Select “Scan QR code” to automatically scan the network, or
ii.
Manually type the Satellite bulb “AD Code”.
NOTE: The AD code in QR format is labeled in two locations: The bottom side
of the Satellite packaging (near the bar code) and on the Satellite bulb itself.
7.
Once the scanning has been successful, select the “Link” option. The Satellite
bulb will connect with the Pulse Link after approximately 30 seconds. Do not
turn off power during the connection.
8.
The Satellite bulb should begin to blink, indicating that it has successfully
connected with the Pulse Link. The user can now enjoy a high-quality audio
system, as desired.
To delete a connected Satellite bulb from the Pulse Link
1.
Ensure that the Pulse Link and Pulse Satellite bulbs are powered on and
paired with your smart device via Bluetooth.
2.
Launch the Pulse App.
3.
Simply switch the Main Brightness ON/OFF button to confirm that all Pulse
bulbs are connected under the same Pulse Link.
4.
Select the “Devices Management” tab in the Settings menu.
5.
Select the Satellite bulb that you want to remove from the Pulse Link Network,
click Delete/Close button.
6.
A delete confirmation will appear on the screen, click “OK” to continue.
7.
Wait for approximately 30 seconds. Do not power off the devices during this
