•
•
•
•
•
•
•
•
•
Installation Instructions
1.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
Follow the Quick Start Guide to get Pulse Link set up
Important Safety Instructions
Please follow all user manual instructions when installing the product
This product is intended for indoor use only
Do not expose this product to moisture
Do not install the product near any heat sources, such as heater, radiators
and stoves
Ensure that the product is stable and secured in place during operation
To reduce the risk of electric shock, do NOT disassemble product
Never push any objects into the openings or slots on the product. Doing so
may result in electric shock or fire hazard.
Only use accessories specifically recommended by the manufacturer
Refer all servicing requests to a qualified Sengled service technician.
Contact
for service details
With the Pulse Link and Satellite bulbs powered on, launch the Pulse App on
your device.
Navigate to “Menu” “Device Management” “Add New Device”
Find the QR label on the product packaging (code can also be found on
each bulb)
Use one of two methods to add a new Pulse Satellite bulb to the network:
a. Select “Scan QR code” and scan the QR label to automatically add the bulb
b. Manually input the Satellite bulb “AD Code” into the app when prompted
NOTE:
The QR and AD code can be found in two locations: The QR label on
the package (near the bar code) and on the Satellite bulb itself.
Once the scan or AD code has been accepted, select the “Link” to finish the
process. The Satellite bulb will connect with the Pulse Link after
approximately 30 seconds. Do not turn off power during this pairing stage.
The Satellite bulb should begin to blink, indicating that it has successfully
connected with the Pulse Link.
TIP:
Give each of your satellite bulbs a unique name (i.e. “Living Room Left”)
to enhance your experience. Rename a bulb by navigating to “Menu” Device
Management and clicking the edit icon.
Launch the Pulse app and navigate to “Device Management”
Select the Satellite bulb that you wish to remove
Click “Delete/Close” icon.
A confirmation will appear on the screen, click “OK” to continue.
Wait approximately 30 seconds. Do not power off the devices during this process
Click the “Refresh” tab in the Menu to confirm that the bulb has been removed
Adding a Satellite Bulb to Pulse Link system:
Removing a Satellite bulb from the Pulse Link system:
