following figure. If need editing the lamp information, click the edit button at
top right corner, and enter the lamp password to edit mode.
Enter the edit mode, basic setup can modify the SSID, the Name of the light, and
set the brightness which the lamp is in power memory last time, so as to recover
after the next to electricity save.
Security Settings change the lamp encrypted and password. Security Settings
page has a button "Removed from the network" which is used to light restore to
factory Settings and removed from the network. Users can use this button to
restore the default lights to networking again.
Under the 'General' tab, the wireless network parameters of the bulb are listed
(such as MAC address). User can change bulb's SSID (listed on the WLAN table,
visible name to public), or Name (listed on the boost by Sengled App) to a more
meaningful name, such as "Living Room AP" or "Living Room Wi-Fi". Press
"Apply" to active such changes.
Under the 'Security' tab, user can change the Encryption Mode, or change the
bulb access Password. Press "Apply" to active such changes.
