1
PH-15FA / PH-15SA
80~100 cm
HEIGHT
Base Unit
Wiring
Front Cover
Vertical Adjustment
Len
Horizontal Adjustment
Screws
Front Cover
Base Unit
Horizontal Adjustment
Vertical Adjustment
Len
Tamper Switch
Terminals
Wiring Hole
Attenuation Sheet
5/32"x1 "
(4x25 mm)
Screws
4
.9
ft
1
.5
M
50ft
(15M)
)
(
Thanks for purchasing this
product
.
Read
this
instruction
before using the product to make sure that you use it correctly.
1
PH-15FA
(FLUSH Mount)
PH-15SA
(SURFACE Mount)
2
PARTS NAME
：
15M SINGLE PHOTOELECTRIC BEAM SENSOR
●
●
●
●
FEATURES OF THE PRODUCT
DRIP
-
BREAKER
DESIGN
,
PH-15FA
COULD
BE
FOR
OUTDOOR
/
INDOOR
.
FLUSH AND SURFACE MOUNT FOR OPTIONS.
3-STEP LED INDICATOR FOR EFFECITVE ALIGNMENT.
BUILD WITH HIGH GRADE ASPHERIC LENS.
MANUAL INSTRUCTION
IMPROPER LOCATION
DETECTION RANGE
INSTALLATION HEIGHT
Avoid any possible objects between
Transmitter and Receiver ( ex. Curtain, Bonsai
…. )
Avoid direct sunshine and long-time strong sunshine,
that would hurt product
'
s life.
With 15M Detection Range between
Transmitter and Receiver.
PRECAUTIONS
FOR
INSTALLATION
：
As these products are designed to detect humans, installing
so that the center of the sensors are at a height of approximately
80cm~100cm from the ground for both wall and pole mounting.
