MI002273-E
ENGLISH 4/8
3.9 Module layout
3.8 Standards
Standards
EN 61000-6-4/ 2007 (electromagnetic emission, in
industrial environment)
EN 61000-6-2/ 2005 (electromagnetic immunity, in
industrial environment)
EN 61010-1/ 2001 (safety)
3.6 Connectors
Connectors
IDC with 10 pins for Seneca bus (output redundancy)
Removable screw terminals: pitch 5.08 mm
3.7 Environmental conditions
Operating temperature
-20 °C.. +70 °C
Humidity
30 - 90% a 40 °C not condensing
Storage temperature
-40 .. +85°C
4.0 PRELIMINARY INSTRUCTIONS FOR USE
The module is designed to be installed on DIN 46277 rail (fig.1) in vertical position.
No operation on the module is allowed while it is power on.
It is forbidden
to install the module near heat-emitting devices.
It is reccomended that the use and installation operations are performed by an
electrical-skilled technician because it is possible to be exposed to risk of
electrocution.
Z-SUPPLY module can achieve a very high temperature, so it is important to be
careful when using it.
Z-SUPPL
Y
Power supply:
110.. 240 V
ac, to
24 Vdc, 1,5A
ET003481B
1.5
DC Output:
24 Vdc
max 1,5
A
M6,Com.
Power good
[N]M3
[L]M1
M1
1,gnd
M10,gnd
M12,gnd
M8,+24Vdc
M7,+24Vdc
M9,+24Vdc
AC main input*:
110.. 240 V
ac
50.. 60 Hz
Fuse
M4,N.Open.
GOOD
PWR
7 8 9
Z-SUPPLY
1 2 3
4 5 6
Input M1,M3:
110.. 240 Vac
50.. 60 Hz
Output M7,M10:
24 Vdc
1,5 A
10 11 12
1112
10
8 9
7
1
1
1,0 mm
35 mm
100 mm
