6/6
DIP-SWITCHES
SW1
Default settings: all DIP switches in OFF position.
For more information see the
USER MANUAL
.
SW2
RS232 or RS485 settings on terminals 10-11-12 (COM2 serial port)
RS232
ON
RS485
OFF
DIGITAL OUTPUTS
The module has two
digital outputs with free
contacts. The figures
show the internal relay
contacts available.
ANALOGUE INPUTS
Inserting the SIM into
the rear slot next to
the IDC10 connector.
Inserting the microSD
or microSHDC card,
into the side slot.
MAX 32 GB.
Push-push connector.
SIM
PROCEDURE FOR MODULE SWITCH-OFF
The module is equipped with an integrated UPS that allows it to remain on even in the absence of external power.
To turn off the module, first disconnect the external power supply and then press the PS1 button on the right side
of the module for at least 6 seconds.
When the button is released, the PWR LED turns off to indicate that the module is turned off.
DIP - SWITCH SETTINGS
CONTACT INFORMATION
Technical support
Product information
This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised.
The content of this document corresponds to the described products and technologies.
Stated data may be modified or supplemented for technical and/or sales purposes.
