background image

ENGLISH - 3/8

 

PRELIMINARY WARNINGS 

The word 

WARNING

 preceded by the 

 symbol indicates conditions or actions that put the 

user's safety at risk.

 

The word 

CAUTION

 preceded by the  symbol 

indicates conditions or 

actions that might damage the instrument or the connected equipment. 

The warranty shall become null and void in the event of improper use or tampering with the module or 

devices supplied by the manufacturer as necessary for its correct operation, and if the instructions 

contained in this manual are not followed.

 

WARNING: The full content of this manual must be read before operation. 

The module 

must only be used by qualified electricians.

 

Specific documentation is available at www.seneca.it/prodotti/z--key-mbus.

 

The module must be repaired and damaged parts replaced by the Manufacturer. The product is 

sensitive to electrostatic discharges; take appropriate measures during any operation.

 

Caution: Obstructing ventilation slots with any object is prohibited.

 

Installing the module next to devices that generate heat is prohibited.

 

Electrical and electronic waste disposal (applicable in the European Union and other countries 

with recycling). The symbol on the product or its packaging shows that the product must be 

disposed of at a collection centre authorised to recycle 

electrical and electronic waste

.

 

t

Summary of Contents for Z-KEY-MBUS









Reviews: