Seneca S6001-RTU, User Manual

Page: 116 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
116
To apply the parameters set in this page to the “Open MODBUS” configuration, the string
“mbtcpcli_params” shall be written in the “Address” field.
It should be noted that the value of the “Port” field is overwritten with the one set in the “Modbus TCP
Client Configuration” web page.
In the following table, all configuration parameters available in the page are listed, with a short explanation
and the parameter default value for each of them.
Field Meaning Default value
IP Address IP Address of the Modbus TCP
Server the client shall connect to 127.0.0.1
TCP Port
TCP Port
of the Modbus TCP Server
the client shall connect to
502
18.1.11 Mobile Network
By clicking on the “Mobile Network” link, in the “Mobile Configuration” menu, you come to the following
page: