Seneca S6001-RTU, User Manual

Page: 11 / 210

USER MANUAL – Z-TWS4/Z-PASS2-S/S6001-RTU
11
NOTE 1:
in the following chapters, the term “Device” will be used when describing features or characteristics that are available
in all three products.
NOTE 2:
in the following chapters, any reference to 3G modem/connection applies also to 4G modem/connection.
3 Technical specifications
COMMUNICATION PORTS (Z-TWS4/Z-PASS2-S)
RS 485 Baud rate: maximum 115 Kbps, minimum 110 bps
COM 4 (screw terminals 4-5-6)
COM 2 (screw terminals 1-2-3 or IDC10 connector)
COM 1 (removable 4 pin connector, as an alternative to RS232)
RS 232 Baud rate: maximum 115 Kbps, minimum 110 bps
COM 1 (removable 4 pin connector, as an alternative to RS485)
CAN CAN bus port 2.0A and 2.0B
Baud rate: maximum 500 Kbps, minimum 20 Kbps
(screw terminals 10-11-12 or IDC10 connector)
available only in Z-TWS4
Ethernet 1 and Ethernet 2 Ethernet 10/100 Mbps
Two RJ45 connectors on front-panel
Maximum connection length 100 m
In Z-PASS2-S-R01/Z-PASS2-S-IO/Z-TWS4-IO, the two ports can work either as
LAN/WAN ports (ETH1=LAN, ETH2=WAN) or ports of an Ethernet switch.
In Z-TWS4/Z-PASS2-S, the two ports can work only as ports of an Ethernet
switch.
USB #1 HOST Plug-in: USB type A
USB #2 HOST Plug-in: micro USB (available only in Z-TWS4)
COMMUNICATION PORTS (S6001-RTU)
RS 485 Baud rate: maximum 115 Kbps, minimum 110 bps
COM 4 (screw terminals 54-55-56)
COM 2 (screw terminals 57-58-59)