User Manual
R-GWR SERIES
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
www.seneca.it
Doc: MI00568-1-EN
Page 16
INHIBITION TIME [min]
Sets whether or not to enable the inhibition for inputs IN0 and IN1 when they are configured as "alarm" (on
event). Any event that occurs before this time has expired from the previous one is ignored. If enabled, it is
possible to choose an inhibition time between 5 and 75 minutes.
An event that occurs before the inhibition time has expired reloads the inhibition time. For example, if the
inhibition time is 5 minutes and a new event occurs after 4 minutes, the inhibition is reset for another 5
minutes.
FIRMWARE UPDATE SECTION
4.3.
The “Firmware Update” section allows you to update the device firmware in order to obtain new functions.
ATTENTION!
NOT TO DAMAGE THE DEVICE DO NOT REMOVE THE POWER SUPPLY DURING THE FIRMWARE
UPDATE OPERATION.
LOCAL TIME SETUP SECTION
4.4.
Allows you to set the current date/time in case it is not possible to access the NTP servers.
The date is now kept for a few days even when the device is not powered.