User Manual
R-GWR SERIES
ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY
BE REPRODUCED WITHOUT PRIOR PERMISSION.
www.seneca.it
Doc: MI00568-1-EN
Page 10
ATTENTION!
AFTER THE FIRST ACCESS CHANGE USER NAME AND PASSWORD IN ORDER TO PREVENT
ACCESS TO THE DEVICE TO UNAUTHORIZED PEOPLE.
ATTENTION!
IF THE PARAMETERS TO ACCESS THE WEB SERVER HAVE BEEN LOST, IT IS NECESSARY TO
RESET THE FACTORY-SET CONFIGURATION (SEE CHAPTER
DEVICE CONFIGURATION
4.2.
To configure the device, access the web server and select the section you are interested in.
After a modification to the configuration has been made, the changes must be confirmed with the "
APPLY
"
button and the device will restart autonomously.
The
Reboot
button reboots the device (not necessary in the event of a configuration change).
The
Default
button returns all the page parameters to the default settings.
SETUP SECTION
4.2.1.
At the top of the screen you can load a previous configuration or save it:
