Seneca R-BT2 Installation Manual Download

Page: 4 / 4

MI00577-0-EN

INSTALLATION MANUAL

4/4

For the correct installation of the product, follow the instructions below:

1. Remove the sensor closing cover;

Remove the battery pre-installed in the housing;

Using the adhesive strip provided, apply the enhanced battery pack to the closing cover;

Insert the 2-pole EHR2 male connector in the appropriate housing (position 4 shown in the sensor layout);

5. Close the sensor closing cover.

CAUTION

It is always necessary to remove the pre-installed batteries before installing new batteries.

It is strictly forbidden to install two batteries at the same time.

Summary of Contents for R-BT2

Page 1: ...Take appropriate measures during any operation PRELIMINARY WARNINGS The word WARNING preceded by the symbol indicates conditions or actions that put the user s safety at risk The word ATTENTION prece...

Page 2: ...2 INDUSTRIAL SENSOR KEY 1 Housing for the battery 2 Button used to pair the sensor and force communication with the R GWR control unit 3 Analogue digital input connection terminal 4 Terminal for the c...

Page 3: ...of different types could cause liquid leakage or battery breakage or damage the device in use Always replace the battery or batteries of the device used with batteries of the size and type specified b...

Page 4: ...3 Using the adhesive strip provided apply the enhanced battery pack to the closing cover 4 Insert the 2 pole EHR2 male connector in the appropriate housing position 4 shown in the sensor layout 5 Clos...