- 6 -
TROUBLESHOOTING
The bridge has been designed to be a reliable and
easy to use connection device. Please refer to the list
below to aid in troubleshooting.
The Power (green PWR) LED is off.
Make sure the power adapter is properly plugged
into a live electrical outlet.
The LAN(Ethernet) LED is off.
Make sure the connection to LAN port is secure.
The Ethernet device to which you are connected
should be powered on and properly configured.
The G.hn Link/Act/Quality LED is off or red
Make sure the connection to G.hn port is secure.
G.hn device to which you are connected should
be powered on and properly configured.
Make sure the quality of coaxial connector and
cable is good.
The
(WiFi) LED is off
Power off then power on the G.hn device.
Cannot connect to the Wi-Fi Bridge.
Make sure if the settings are correct.
The default SSID and the default WPA/WPA2
pre-shared key are on the label of device.
Restore the default factory reset by pressing R
button more than 3 sec (LED flashing), then
release the button while LED steady ON.