replaced. If the headset is under appropriate use, the battery will work for a
long time. New battery or the one, which has not been used for a long time,
please lower electricity capacity in the first few times.
Turning the headset on or off
Turning on the headset
Continuously pressing MFB button for 4 seconds or more, the indicator on the
headset will start to flash and signal sound. You may start to operate your
headset now.
Turning off the headset
Continuously pressing MFB for 4 seconds or more, until you see the indicator
light becomes lighting from blinking, headset will then turn off.
!
Pairing your Headset and Phone
First, please make sure that your phone is Bluetooth-supported, and then put
your phone and handset within the effective range (10 m) to make them enter
pairing mode.
1. Turn on both your headset and phone.
2. Press 2 volume buttons at the same time for 4 seconds or more, and wait
for indicator to turn on, this shows headset is now in pairing mode.
3. Select “
SEN-HS02
” from the handset screen to pair handset and phone.
4. Afterward, you will be asked to enter the password. Please enter 0000. If
pairing is successful, the indicator light on headset will rapidly blink 5 times.
5. Short press MFB the mobile phone will descriptions to ask you to connect,
please select “Yes”.
6. After disconnected, please follow the 5th step again from the mobile phone.
7.. To leave pairing mode, press 2 volume buttons at the same time for 4
seconds or more, wait until indicator light start to blink, pairing mode is
off.
Note:
If your Bluetooth handset cannot search the headset within 1 minute,
Summary of Contents for HS02
Page 8: ......
