You have now created a 350 High Jump Ramp – See Skate Plate fitting instructions below if you have purchased one!
CREATING A 500 mm HIGH JUMP RAMP
STAGE 3:
Take the two triangular front legs and longer back legs. Rest your 350 High Ramp on its side. Take the first front leg
marked with 500 and hold this above the hole at the lowest end of the ramp.
These triangular feet have a specific side. On the back face of the feet is a stepped section. You can easily assess the
correct location for each foot by sitting the foot at the end of the ramp and seeing if the holes and step line up. Take
