manualshive.com logo in svg

Sencore VideoPro VP400 Series, Operation Manual

Share
Download
Sencore VideoPro VP400 Series Operation Manual Download Page 58

VP400 Series Video Pro 

Form7343A 

Operation Manual 

59 

SDI/HDSDI Video Resolution Formats 

 
An SDI/HDSDI signal can be one of several different resolutions. The SDI format may be 
divided into either a 525 (720x486) @ 59.94i or a 625 (720x576) @ 50i signal resolution. These 
are commonly called NTSC and PAL serial digital signals. Both resolutions employ 10 bit data 
and a data clock rate of 270 Mb/s. 
 
The HDSDI signal offers multiple resolutions in 720 or 1080 formats. The 720p signal format is 
available at frame rates of 60, 59.94 or 50 Hz. The 1080 signal format is available in interlaced, 
segmented or progressive scan formats at applicable frame rates of 30, 29.97, 25, 24, or 23.98 
Hz. HDSDI employs 10 bit data and a data rate of 1.485 Gb/s.    
 
 
 
 
 
 
 

Figure 4. The SD/HDSDI output of the 
VideoPro offers two SDI output signal 
formats and multiple HDSDI 720 or 1080i 
formats. 

 
 
 
 

To output an SDI or HDSDI signal 
from the ‘SH’ VideoPro: 

 

1. Connect a BNC cable to the 
VideoPro SDI/HDSDI output and 
to the SDI/HDSDI input of the 
device to be tested. (BNC to BNC 
cable – Sencore #39G232)  
 
2. Power the VideoPro ON. Push the “SIGNAL TYPE” pushbutton. Push the large ‘-‘ 
scroll down pushbutton to increment to the second signal type menu. Press the 
pushbutton beside the display choice “HD/SDI”. Note: A format menu appears. 
 
3. Select the desired SDI or HDSDI signal format. Pushing the ‘-‘ scroll down button 
moves down to additional menus or formats. Pushing the ‘+’ scroll up pushbutton moves 
upwards through the menus. To choose a format and press the pushbutton beside the 
display listing of the desired format. 
 
4. Select a video test pattern by pushing the PATTERN pushbutton and again pressing 
the pushbutton beside the display indicating the desired pattern. Use the ‘-‘ and ‘+’ scroll 
down pushbuttons to see additional menus. 

Note: Many menus have listings on each side 

of the display.

 

 

Summary of Contents for VideoPro VP400 Series




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands