Sencore VB330, User Manual

Page: 79 / 203

6.4.5 Multicasts — Join
In order for the defined Ethernet multicasts to be monitored by the probe, they must be joined. The
Multicasts — Join view and the Multicasts — Streams view allow the user to select which multicasts
that are joined by the probe.
Streams defined in the Multicasts — Streams view will appear as available streams on the left hand
side of the arrows in this view. Select streams to be monitored by clicking them and moving them to
the right hand side of this view using the arrow. Changes should be confirmed by clicking the
Apply
changes button.
Joined streams may be freely associated with the 30 probe pages. The streams will be presented in the
Joined multicasts list in the
Multicasts — Parameters view.
It is possible to flush or fill the multicasts/unicasts to monitor list by clicking the corresponding button.
Note that these operations will take effect immediately; it is not necessary to click
Apply changes for
multicasts to be joined or unjoined.
VB3xx 10G Probe User’s Manual version 5.3 79