MRD 7000
– User Manual
Page 84 (126)
Setting
Range
Description
Network Name
Alphanumeric, no
spaces allowed
This setting allows the user to define an optional
unit Hostname.
Mode
Static
DHCP
IP is entered by user and will not change
IP is assigned to MRD by network/router
IP Address
Four decimal octets:
XXX.XXX.XXX.XXX
This option is only available if Static Mode is set.
This is the IP address assigned to the
management port.
Subnet Mask
255.0.0.0
–
255.255.255.254
This option is only available if Static Mode is set.
This is the Subnet Mask assigned to the
management port.
Gateway
Four decimal octets:
XXX.XXX.XXX.XXX
This option is only available if Static Mode is set.
This is the Gateway address assigned to the
management port. This setting will need to
match your NMOS handshake port. Refer to
section 3.3.13.
3.3.13
NMOS Settings
With the SMPTE 2110 module and the MRD 70760 NMOS license, a user can configure
NMOS connections. To access this menu, click on the Configure NMOS Settings gear
icon under the NMOS Settings section in the Admin page.