Page | 25
6 S2X Input Application
The “S2X input” application configures the demodulators on a given module. Each demodulator is represented as a row
in the main table view. Each row includes a subset of configuration and status of a demodulator. Expanding a row shows
a list of the services in the TS with service name and service ID. The “S2X interfaces” application configures the number
of demodulators per module and the LNB frequencies per port, as described in section X.X.X. When mapping a service
from the S2X input card to an output card; the slot, port, satellite frequency and TS label are used as source reference.
Enabled
The enable button lets the operator easily disable an input.
Port
The physical port in use. The label of the port is defined in the “S2X
Interfaces” application.
Label
A label of the transport stream (TS).
Mode
The configured analyze mode can be either MPEG or DVB.
Services
The number of services detected in the transport stream.
Satellite
Frequency
The configured satellite frequency.
Modcod
Status of detected modulation standard, constellation scheme and
FEC rate.
Symbol
rate
The configured symbol rate.
Lock
Green circle if the demodulator has achieved lock.
CC errors
The number of times the CC counter of any PID in the TS has not
been continuous.
6.1 Configuring a demodulator
Select a demodulator to display the “Details” pane on the right-hand side. Select the “Edit” tab to change configuration.
Summary of Contents for DMG 4000
Page 54: ...Page 54...
