EN – 17
Channel Auto-Scan Display:
• Press To enable an automatic scan of all channels, press and hold
CHANNEL
, until the
icon is displayed. The measurements from
each remote channel will be alternatively displayed with a 5 seconds
viewing.
NOTE:
The channel auto-scan feature can be active only if there
are more than
one
remote sensors operating and are set to different channels.
MAXIMUM AND MINIMUM TEMPERATURES
• The maximum and minimum recorded indoor and outdoor temperatures
and humidity will be automatically stored in the memory of the main unit.
Press [
MEM]
button, the respective indicators, [
MAX]
or [
MIN]
will then
be displayed.
• To clear the memory, hold [
MEM]
button
for 3 seconds. The maximum
and minimum temperature records will be erased.
ALARM FEATURE
There are three time alarms available on the main unit:
Weekday Alarm
• The alarm sound will be activated and the icon will
fl
ash on weekdays
(Mo to Fr) when it is armed and the alarm time is reached.
Single Alarm
• The alarm sound will be activated and the icon will
fl
ash when it is
armed and the alarm time is reached. Once it
fi
nished, it will be disabled
automatically
Pre-Alarm
• The pre-alarm will be activated and the icon will
fl
ash if the temperature
of Channel 1 is falling to +0
℃
or below.
• It is programmable 15, 30, 45, 60 or 90 minutes earlier than the weekday
alarm or single alarm time.
Summary of Contents for SWS 105
Page 2: ......
Page 22: ...EN 20 Heat Storms Sleet Showers Snow Showers Sleet Snow...
Page 26: ...EN 24...
