EN-3
EN
Electric Kettle
User‘s manual
In case the electric cable is damaged, have it replaced by an expert service. Do not use the ap-
pliance if it has a damaged electric cable/electric cable plug.
Do not place the electric cable of the appliance near hot surfaces, or over sharp objects. Do not
place heavy objects on the cable, position the cable so that it is not stepped on, or tripped over.
Make sure the power cable does not hang over the edge of a table, or that it does not touch
a hot surface.
Do not disconnect the appliance from the power point by pulling the electric cable - it may
damage the electric cable/power point. Disconnect the cable from the power point by gently
pulling the plug of the electric cable.
Do not use the kettle for other purposes than it is intended for.
Only use the kettle with the stand, which is designed for this type of kettle and which is supplied
with it. The stand supplied with this kettle is not to be used with other types of kettles.
Warning! When boiling water in the stainless-steel kettle, the metal parts of the kettle become
hot. Do not touch the hot surface, it could lead to a skin burn.
The electric kettle is protected against failure, when it is accidentally turned on without water.
Prior to first use, boil clean water in the kettle and empty the kettle. Repeat this process 5-6
times.
Use the Electric Kettle for the sole purpose of boiling water.
Warning! Never move the lid of
the kettle, or open it while the water is boiling.
Description of kettle
A - Spout with replaceable filter inside
B - Button for opening the top lid
C - Water gauge
D - Switch 0/I with light control of on state
E - Stand with central connector
A
B
C
D
E
