Sencor SVC 8936TI, Original Manual

Page: 9 / 9

- 9 - 07/2019 Copyright © 2019, Fast ČR, a.s.
Warning:
To prevent the risk of injury by electrical shock, do not submerge
the appliance, power cord or power plug in water or any another
liquid.
Dust container and filters
Press the button
A7
to release the dust container
A8
from the vacuum cleaner body
A5 . Place the dust container A8 above the dust bin. Hold the handle of the filter and
carefully pull it from the container – see picture F.
Remove all contents of the dust container A8 and if necessary, rinse it out with water.
Allow it to dry and ensure the dust container A8 is completely dry before assembling.
Hold the internal filter
A12
by its handle and turn it towards left to remove the internal
filter A12 from the external filter A11 – see picture G.
Remove dust and dirt form the external filter A11 and if necessary, wash is under cold
running water. Allow it to dry and ensure the external filter
A11
is completely dry
before assembling.
Carefully remove dust and dirt from the internal filter A12 . If the internal filter A12 is
soiled heavily, wash it under running water. Allow it to dry naturally.
To assemble the dust container and filters, proceed in reverse sequence.
Warning:
Before assembling the vacuum cleaner, make sure that all its
parts are completely dry. Prior to starting it, make sure that all the
filters are properly installed in their place. Otherwise, this could
damage the vacuum cleaner.
When the filters are soiled, their effectiveness is reduced, so do
not neglect their cleaning.
After 6 months of use, we recommend replacing the internal filter A12 for a new one.
Spare filters are available at brick or mortar, and online stores.
Floor nozzle
If the rotary brush is soiled, remove the floor nozzle
A10
from the vacuum cleaner body
A5 by pressing the button A9 . Turn it so that the rotary brush is pointing upwards. On
the left side of the nozzle A10 , there is a latch that secures the brush cover in place.
Release the latch, tilt open the cover and take out the brush – see picture H.
Remove all dirt and dust from the rotary brush and the internal space of the floor
nozzle A10 . After cleaning, return the rotary brush back in its place. Tilt the cover back
and secure in place.
For cleaning the surface of the floor nozzle A10 use a dry or a lightly dampened cloth.
Then wipe everything so that it is thoroughly dry.
Outer surface of the vacuum cleaner
Clean the outer surface of the vacuum cleaner using a dry or a lightly dampened cloth.
Then wipe everything so that it is thoroughly dry.
Warning:
Do not use steel wool, abrasive cleaning products, solvents, etc.
to clean the vacuum cleaner.
Cleaning the mop attachment
Drain out the tank I2 after each use of the attachment I1 . Wipe the attachment with
a soft cloth slightly soaked in warm water. Wipe with a clean cloth to dry.
Remove the mop cover I4 and hand wash it in clean water. Let it dry.
Warning:
Under no circumstances immerse or wash the attachment I1 in
water or any other liquid.
Storage
When not using the appliance for an extended period, clean it according to the above-
mentioned instructions.
Ensure the vacuum cleaner is thoroughly clean and dry.
Store the appliance in a dry, clean and well-ventilated location not exposed to extreme
temperatures and out of children’s reach.
TROUBLESHOOTING
PROBLEM SOLUTION
Vacuum cleaner
cannot be turned
on.
Check whether the battery is not discharged. If so, recharge it.
Check whether the rotary brush / filter is not blocked. Clean
the rotary brush / filter.
Battery is not
charged.
Check whether you use the power adapter correctly.
Check whether the power adapter is correctly connected to
the vacuum cleaner and power outlet.
Low vacuuming
efficiency.
Check the status of filters and clean them. If necessary,
change the internal filter for a new one.
Check whether the rotary brush is not jammed by hair or
animal fur. Remove all dirt from the rotary brush.
Check whether the dust container and filters are correctly
installed in the vacuum cleaner body.
SPECIFICATIONS
Power adapter
Input .....................................................................................................100 – 240 V ~, 50/60 Hz, 0,5 A
Output .......................................................................................................................40 V , 360 mA
Electric shock protection class............................................................................................................II
Vacuum cleaner
Power input .....................................................................................................................................150 W
Electric rotary brush ........................................................................................................................10 W
Li-Ion battery.......................................................................................36 V , Li-Ion / 2150 mAh
Time required for charging to full capacity...................................Approximately 6 - 8 hours
Operating time when fully charged (high / low power) ..............................25 min / 60 min
Noise level ....................................................................................................................................78 dB(A)
Dust container capacity ......................................................................................................................1 l
Electrical shock protection class .......................................................................................................III
The declared noise emission level of this appliance is 78 dB(A), which represents level
A of acoustic power with respect to a reference acoustic power of 1 pW.
We reserve the right to change text and technical specifications.
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty
insulation.
The appliance is intended for household use only. The appliance is not
intended to be used outdoor.
Before using the appliance, properly read all the instructions in this
user´s manual.
Product with protection class III: product is designed for separated/
safety extra-low voltage. Electrical shock protection is provided by
separated/safety extra-low voltage.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling hand over
these appliances to determined collection points. Alternatively, in
some European Union states or other European countries you may
return your appliances to the local retailer when buying an equivalent
new appliance. Correct disposal of this product helps save valuable
natural resources and prevents potential negative effects on the
environment and human health, which could result from improper waste disposal. Ask
your local authorities or collection facility for more details. In accordance with national
regulations penalties may be imposed for the incorrect disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier
for the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.
DISPOSAL OF BATTERIES
Prior to disposing of the product or handing it over at a specialised
collection facility, it is necessary to ensure that the built-in battery is
removed. Before removing the battery, it is necessary to start the
vacuum cleaner and wait until it is completely flat. Battery removal will
be performed at the authorised service centre.
The battery contains environmentally damaging substances and
therefore does not belong in standard household waste. Their correct
disposal will be performed by the respective collection facility.