Sencor SVC 8825TI, Original Manual

Page: 8 / 9

- 8 -
06/2019
Copyright © 2019, Fast ČR, a.s.
EN
Cordless vacuum cleaner 2 in 1
User‘s manual
■
Prior to using this appliance, please read the user’s manual thoroughly, even in cases where you have previously
familiarised yourself with the operation of similar types of appliances. Only use the appliance in the manner described
in this user’s manual. Keep this user’s manual in a safe place where it can be easily retrieved for future use.
■
We recommend saving the original cardboard box, packaging material, and purchase receipt and responsibility
statement of the vendor or warranty card for at least the duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we recommend that you pack the appliance in the original box from the
manufacturer.
DESCRIPTION OF THE VACUUM CLEANER AND ITS ACCESORIES
A1 Vacuum cleaner handle with a bend
A2 On/Off button of the vacuum cleaner
A3 Suction level button of the vacuum cleaner
A4 Vacuum cleaner bend
A5
Release button of the hand vacuum cleaner from
the vacuum cleaner body
A6 Handle of the hand vacuum cleaner
A7
Power adapter charging socket
A8 Hand vacuum cleaner
A9 Step-in area for automatic cut-off hair from the
rotary brush
A10 Floor nozzle with an electric rotary brush
A11 Bend button
A12 Floor nozzle release button
A13 Wheels
A14
Suction level button of the hand vacuum cleaner
A15 On/Off button of the hand vacuum cleaner
A16 LED indicators of charging and battery level
A17
Dust container release button
A18 External filter
A19 Washable internal filter
A20 Dust container
A21 Release button of the bottom side of the dust
container
A22
Battery space (at the back of the hand vacuum
cleaner)
A23 Charging base
A24
Power adapter charging socket
A25 Power adapter
A26 Protection cover of the knife to cut off the hair and
animal fur
knife to cut off the hair and animal fur (located
under the protection cover, not shown)
A27 Dust compartment (located at the bottom part of
the charging base)
A28
Small multi-purpose brush nozzle
A29 Slide control to pull out and hide the brush
A30 Crevice nozzle
A31
Battery of the hand vacuum cleaner
BEFORE FIRST USE
■ Before first use, take the appliance and its accessories out of the packaging material and remove all promotional labels
and stickers. Check that neither the appliance nor any of its parts is damaged.
ASSEMBLY
Hand vacuum cleaner
■ At the back side of the hand vacuum cleaner, there is a slot to insert the battery A31 . Insert the battery A31 into the
slot as shown in picture B. The correct installation of the battery
A31
is indicated by a click sound.
■ Ensure the dust container A20 is attached to the hand vacuum cleaner A8 .
Upright vacuum cleaner
■ Connect the floor nozzle A10 to the bottom part of the upright vacuum cleaner as shown in the picture C . The correct
connection of the floor nozzle
A10
is indicated by a click sound. Press the bend button
A11
and bend the handle
A1
to the upright position till you hear a click sound. Install the hand vacuum cleaner A8 into the space in the middle
of the vacuum cleaner body.
Charging base
■
Insert the upper part of the charging base into the lower part as shown in the picture
D
.
PARKING POSITION OF THE VACUUM CLEANER
■ Put the vacuum cleaner into the parking position by placing the tip of your foot on the top of the floor nozzle A10
and with a simply forward movement of the handle A1 secure the vacuum cleaner in the vertical position. The latch
located at the front of the elbow of the floor nozzle
A10
will slide into the groove on the top cover of the floor nozzle
A10 .
■ To release the vacuum cleaner from the parking position, place the tip of your foot on the top of the floor nozzle A10
and tilt the hand A1 backwards. The latch located at the front of the elbow of the floor nozzle A10 will slide out of
groove on the top cover of the floor nozzle A10 .
CHARGING THE VACUUM CLEANER
■
Place the assembled charging base
A23
on the flat, dry and stable surface within reach of the power socket.
■ Connect the connector of the power adapter A25 to the socket A24 at the back of the charging base A23 and insert
the plug of the power adapter A25 into the power socket – see picture E . Or you can connect the connector of the
power adapter
A25
to the socket
A7
in the hand vacuum cleaner
A8
– see picture
F.
Note:
Before charging, it is important the vacuum cleaner has been turned off and has been
tilted in the upright position.
■
Once the adapter
A25
has been inserted into the power socket, the vacuum cleaner will switch to charging mode and
LED indicators A16 will signal the power level of the battery A31 . A full charge requires approximately 3 hours. The
actual charging time depends on the power level of the battery.
■ Once the charging process is complete, all LED indicators A16 will be lit. Disconnect the power adapter A25 from
the power socket.
■
If one LED indicator is flashing while vacuuming, the battery
A31
is low and it needs to be charged.
Warning:
If all LED indicators A16 flash, the vacuum cleaner might be broken. In such
case, at first remove and re-insert the battery A31 a turn on the vacuum
cleaner. If the problem persists, stop using the vacuum cleaner and contact the
authorised service centre.
Note:
This vacuum cleaner contains a built-in Li-ion battery. To ensure the longest possible
lifetime of the battery, we recommend:
- Do not unnecessarily leave the battery fully charged or completely flat for too long.
- Do not keep the battery permanently fully charged. Its lifetime will be extended by keeping it at
approximately half charge.
- Do not fully discharge the battery.
Note:
The power adapter can be stored at the back of the charging base
A23
.
USING THE VACUUM CLEANER
Upright vacuum cleaner
■
You may use the vacuum cleaner for vacuuming various types of floor coverings such as for example hard floor
coverings, carpets, etc.
■ Hold the vacuum cleaner by the handle A1 and pulling it upwards, remove it from the charging base A23 . After
removing it from the charging base A23 , the vacuum cleaner should be secured in the vertical parking position. After
releasing it from the parking position, the handle may be moved in the vertical direction.
■
Start the vacuum cleaner by pressing button
A2
. Use the button
A3
to regulate the suction power of the vacuum
cleaner.
■ If you need to use the vacuum cleaner in the difficult-to-access places, e.g. under the chair, press the bend button A11 .
The handle
A1
will be released from the bend and you can easily vacuum in such place. Release the button
A11
and
carefully place the handle into the upright position till you hear a click sound.
■ When you have finished using the vacuum cleaner, press the button A2 to turn it off. Clean it according to the
instructions in chapter “Cleaning and maintenance” and allow it to charge according to the instruction in chapter
“Charging the vacuum cleaner”.
Hand vacuum cleaner
■ To release the hand vacuum cleaner A8 from the vacuum cleaner body, press button A5 and the upper part of the
hand vacuum cleaner will be released. Hold the hand vacuum cleaner
A8
by the handle
A6
and carefully take it out
from the vacuum cleaner body.
■ Press button A15 to turn on the hand vacuum cleaner. Use the button A14 to regulate the suction power of the hand
vacuum cleaner. The hand vacuum cleaner
A8
is suitable for vacuuming locally soiled floor coverings, furniture, etc.
■ For more comfort vacuuming, e.g. furniture, attach the multi-purpose brush nozzle A28 to the hand vacuum cleaner
A8 . Use the slide control A29 to pull out and hide the brush.
■ When you have finished using the vacuum cleaner, press the button A15 to turn it off. Clean it according to the
instructions in chapter “Cleaning and maintenance” and allow it to charge according to the instruction in chapter
“Charging the vacuum cleaner”.
Note:
The LED indicators A16 signal the batter power level. The individual LED indicators will
turn off as the battery gradually discharges. If it is discharged fully, one LED indicator
will flash, and the vacuum cleaner will stop running.
CLEANING AND MAINTENANCE
■ Before cleaning, always make sure that the vacuum cleaner is turned off and the power adapter is disconnected from
the power socket. We recommend running the cleaning and maintenance after each use to prolong the lifetime of
your vacuum cleaner.
Warning:
To prevent the risk of injury by electrical shock, do not submerge the appliance,
power cord or power plug in water or any another liquid.
Dust container and filters
■
If you use the upright vacuum cleaner, at first, it is necessary to remove the hand vacuum cleaner
A8
from the vacuum
cleaner body by pressing the release button A5 .
■ Press the button A17 to release the dust container A20 from the hand vacuum cleaner A8 . Place the dust container
A20
above the dust bin and press the button
A21
to open the bottom cover of the dust container
A20
– see picture
G. Remove all contents of the dust container A20 . Then close the cover.
■ Now, remove the external filter A18 by holding the side holders and then remove the internal filter A19 .
■
Rinse the dust container
A20
and thoroughly wipe dry.
■ Remove dust and dirt from the internal filter A19 and if necessary, wash it under a gentle current of running water
and allow it to dry.
■
Shake out dust and dirt from the external filter
A18
over the dust bin. If necessary, you can take out the soft foam part
of the filter and wash it under a gentle current of running water and allow it to dry.
Warning:
Before assembling the vacuum cleaner, make sure that all its parts are
completely dry. Prior to starting it, make sure that all the filters are properly
installed in their place. Otherwise, this could damage the vacuum cleaner.
When the filters are soiled, their effectiveness is reduced, so do not neglect
their cleaning.
■ After 6 months of use, we recommend replacing the internal filter A18 for a new one. Spare filters are available at
brick or mortar, and online stores.
Cutting off hair from the rotary brush
■
The vacuum cleaner is provided with the automatic cut-off hair feature from the rotary brush.
■ Place the vacuum cleaner to the parking position and insert it into the charging base A23 . Ensure the power adapter
A25 is plugged in the power socket. Carefully, by tip of your foot, press and hold the step-in area A9 on the floor nozzle
A10
for about 10 seconds. The charging process will be interrupted, and it will automatically cut off the jammed hair
from the rotary brush and it will vacuum them as well. Release your foot from the step-in area A9 and the charging
process will be recovered.
■ At the bottom part of the charging base A23 , there is a dust compartment A27 where the knife is stored, and at
the same time, it serves to catch dirt that do not have to be vacuumed after cutting of hair from the rotary brush.
Remove the vacuum cleaner from the charging base
A23
and unplug the connector of the power adapter
A25
from
the charging base A23 . Turn the charging base A23 upside down, release the latches of the dust compartment A27
and remove the cover. Empty the content of the compartment A27 into the dust bin. Place the cover back and press
it till you hear a click sound of the latches.