Sencor SVC 8505TI, Original Manual

Page: 6 / 7

05/2019
- 6 - Copyright © 2018, Fast ČR, a.s.
EN
Bagged Vacuum Cleaner
User's manual
■ Prior to using this appliance, please read the user’s manual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’s manual.
Keep this user’s manual in a safe place where it can be easily retrieved for future use.
■ We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
DESCRIPTION OF THE VACUUM CLEANER AND ITS ACCESSORIES
A1
Automatic power cord winding
button
A2 Stainless steel grill
A3
Electronic suction power control
A4 Lid of storage area for dusting brush
and crevice nozzle
A5
Full dust bag indicator
A6 Lock for lid of storage area
A7 Flexible hose connection hole
A8 Top cover lock
A9 Integrated handle
A10
On/Off button of the vacuum
cleaner
A11 Groove for the horizontal parking
position
A12 Rubber-coated rear travel wheel
A13 Front rotating travel wheel
A14
Groove for the vertical parking
position
A15 Removable grill of the outflow HEPA
filter
A16 Washable outflow HEPA filter
is placed behind the grill.
A17 Dust bag*
A18 Dust bag holder
A19
Grill of the inflow micro-filter
A20 Washable inflow micro-filter
is placed in the grill.
A21
Flexible hose with an integrated
brush
A22 XXL telescopic metal tube
A23 Floor nozzle with an extensible
brush and DEEP cleaning and EASY
cleaning switch
A24 Flap for extending and retracting
the brush
A25
Turbo brush
A26 Suction power control
A27 Hard floor nozzle
A28
Mini turbo brush
A29 Long flexible crevice nozzle
A30 Dusting brush
A31
Crevice nozzle
*Note:
One disposable synthetic dust bag is included with the product.
Synthetic dust bags last longer, are more durable and provide better
filtration than standard paper bags.
Note:
The dusting brush A30 and crevice nozzle A31 are stored in the storage
area under the lid
A4
.
INTENDED USE OF THE ACCESSORIES
■ The universal floor nozzle with an extensible brush A23 is intended for all floor
types. Extend the brush when vacuuming smooth hard floors, and retract it when
vacuuming carpets. To extend and retract the brush, use flap
A24
on the floor
nozzle A23 . Floor nozzle A23 also has a switch for extending out a travel roller. This
switch is located in the centre of the floor nozzle A23 and it has two positions - deep
cleaning and easy cleaning. The deep cleaning position (the travel roller is retracted)
is ideal for deep and thorough vacuuming of carpets. The easy cleaning position
(the travel roller is extended) makes movement over the vacuumed surface easier.
We recommend to slightly lift up the floor nozzle
A23
when you wish to switch to
the easy cleaning position.
■ The turbo brush A25 is suitable for vacuuming smooth hard surfaces and carpets
with a low pile height. Thanks to the rotating brush, it very quickly and effectively
removes ingrained dirt, threads, animal fur, hair, etc. Use the sliding suction power
control A26 to set the suction intensity.
■ The hard floor nozzle A27 ensures perfect and yet gentle vacuuming of smooth
hard surfaces thanks to the brush being from 100% natural bristles. It can be used
to vacuum floors that are sensitive to scratching such as wooden or floating floors,
marble floors, tiles, linoleum, etc.
■ The mini turbo brush A28 is the ideal helper for removing animal fur, hair, etc.,
while at the same time being suitable for vacuuming hard-to-reach places. Its use
is not limited to the home, and can be used for vacuuming the car. It quickly and
effectively removes hair, animal fur and other materials from car seats, upholstery,
pillows and other textile surfaces.
■ The long flexible crevice nozzle A29 serves to vacuum very hard-to-reach places
anywhere in your car.
■ The crevice nozzle A31 can be used for vacuuming hard-to-reach places and the
dusting brush A30 is used for vacuuming various types of furniture.
PREPARING FOR USE
■ Make sure that the dust bag A17 , inflow micro-filter A20 and outflow HEPA filter
A16
are properly installed.
■ Insert the end of the flexible hose A21 into the hole A7 and turn it clockwise to
secure it in place.
Note:
For removal, turn the end of the hose A21 anticlockwise and pull it out
of the hole
A7
.
■ Attach the telescopic tube A22 on to the handle of the flexible hose A21 . Slide the
ring that is located on the telescopic tube A22 towards the handle of the flexible
hose
A21
to release the extension lock on the telescopic tube
A22
. After releasing
the lock, set the length of the tube A22 by sliding its extensible part in or out. When
the ring is released, it will lock in at the set length.
■
Select the type of accessory that you wish to use and attach it to the free end of the
telescopic tube A22 . Certain types of accessories such as for example A28, A29, A30
or A31 are attached directly on to the handle of the flexible hose A21 .
USING THE VACUUM CLEANER
■
Pull on the power plug to wind out the required length of the power cord and
connect it to a power socket.
Attention:
The yellow mark on the power cord indicates the approaching
end of its length, and the red mark indicates the complete end of
its length. Do not attempt to pull the power cord past this mark.
■
To start the vacuum cleaner, press button
A10
. Suction power can be set using the
electronic control A3 or the mechanical flap on the handle of the flexible hose A21 .
■ When you have finished using the vacuum cleaner, turn it off by pressing button
A10 and disconnect the power cord from the power socket. To wind the power cord
back into the vacuum cleaner, press and hold button A1 until its entire length is
wound up
.
Gently hold the power cord with one hand while winding it up.
Note:
If the power cord is not wound up completely, release button A1 , and
pull the power cord out of the vacuum cleaner by approximately 50 cm
and then try again to wind it up.
PARKING POSITION OF THE VACUUM CLEANER
■ When not using the vacuum cleaner, you may put it in the parking position. For the
horizontal parking position, slide the stopper on the nozzle
A23
or
A27
or turbo
brush A25 into the groove A11 , see fig. B1.
■ For the vertical parking position, first set the shortest length of the telescopic tube
A22
. Then put the vacuum cleaner into a vertical position and slide the stopper on
the nozzle A23 or A27 or the turbo brush A25 into the groove A14 , see fig. B2.
MAINTENANCE AND CLEANING
■ Before cleaning it, always make sure that the vacuum cleaner is turned off and
disconnected from the power socket.
Changing the dust bag
■
The red coloured indicator
A5
signals the need to replace the dust bag
A17
.
■ Release the lock A8 and tilt open the top cover of the vacuum cleaner. Remove the
used dust bag A17 from the holder A18 and insert a new bag intended for this type
of a vacuum cleaner in its place. After replacing the bag
A17
, close the top cover
of the vacuum cleaner. It will not be possible to close the top cover of the vacuum
cleaner unless the bag is correctly inserted in the holder A18 .
■ If the dust bag is not replaced in time, the vacuum cleaner’s suction power will be
reduced.
Cleaning and replacing the inflow micro-filter and the outflow HEPA filter
■ Release the lock A8 and tilt open the top cover of the vacuum cleaner. Slide the grill
A19
out of the vacuum cleaner and take the micro-filter
A20
out of it. Rinse it under
running lukewarm water and allow to dry naturally. Then reinsert it and close the
cover. In the event that the micro-filter A20 is showing signs of wear or it is heavily
soiled, replace it with a new one.
■ Release and remove the grill A15 . Remove the HEPA filter A16 from the vacuum
cleaner. In the case of light soiling, tap it out. We recommend doing this away from
living areas. In the event of greater soiling, wash it under a weak current of running
lukewarm water so that the water washes the dirt out of the folds. Allow the HEPA
filter A16 to dry naturally, then reinsert it and secure it in place with the grill A15 .
It is recommended to replace the HEPA filter with a new one after 6 months of use.
■ When filters are soiled, their effectiveness is reduced, so do not neglect their
cleaning.
Attention:
Before putting the filters back into the vacuum cleaner, make
sure that they are completely dry.
Cleaning the flexible hose, telescopic tube, floor nozzle, hard floor nozzle, mini
turbo brush, flexible crevice nozzle, small crevice nozzle and the dusting brush
■ If the accessories are soiled, take them out and clean away all dirt (dust, hair, animal
fur, etc.).
Cleaning the turbo brush
■ Release the latches along the sides of the turbo brush A25 , see figure C1. Remove
the front cover and remove all dirt, hair, animal fur, etc. from the rotary brush and
the inner area. After cleaning, put the front cover back and secure it in place using
the locking latches.
■ Press the cover latches located on the underside of the turbo brush A25 to release
them, see figure C2. Remove the cover and remove any soils from the inner area of
the turbo brush
A25
. Put the cover back in its place. An audible click will be heard
when it slides back into place.