Sencor SVC 7811WH, Translation Of The Original Manual

Page: 7 / 9

- 7 -
07/2021
2021
EN
Upright vacuum cleaner
User's manual
■ Prior to using this appliance, please read the user‘s manual thoroughly,
even in cases, when one has already familiarised themselves with
previous use of similar types of appliances. Only use the appliance in
the manner described in this user’s manual. Keep this user‘s manual in
a safe place where it can be easily retrieved for future use.
■
We recommend saving the original cardboard box, packaging material,
purchase receipt and responsibility statement of the vendor or warranty
card for at least the duration of the legal liability for unsatisfactory
performance or quality. In the event of transportation, we recommend
that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE VACUUM CLEANER AND ITS
ACCESSORIES
A1 Handle
A2 On/Off button of the upright
vacuum cleaner
A3 Body of the upright vacuum
cleaner
A4
Hand vacuum cleaner
A5 Floor nozzle release button
A6 Floor nozzle with an electric
rotary brush
A7 Locking screw
A8 Hand vacuum cleaner release
button
A9 Travel wheels
A10 Dust container
A11
Dust container release button
A12 Battery level indicator
A13 Suction power adjustment
button of the upright vacuum
cleaner
A14
On/Off button of the hand
vacuum cleaner
A15 Hand vacuum cleaner handle
A16
Air outlets
A17 Suction hole
A18 Washable inner HEPA type
filter.
A19 Washable outer filter
A20 Charging base
A21
Accessory storage
compartment
A22 Power adapter
A23
Brush nozzle
A24 Crevice nozzle
Note:
Charging base and power adapter are sold separately.
BEFORE FIRST USE
■ Before first use, take the appliance and its accessories out of the
packaging material and remove all promotional labels and stickers.
Check that neither the appliance nor any of its parts is damaged.
ASSEMBLY AND DISASSEMBLY
Assembling and disassembling the hand vacuum
cleaner
When assembling the hand vacuum cleaner A4 , proceed as follows:
1. Insert the inner filter
A18
into the outer filter
A19
.
2. Insert both filters into the dust container A10 and check that they are
properly inserted.
3. Put the dust container
A10
on to the motor unit of the hand vacuum
cleaner.
If you need to disassemble the hand vacuum cleaner A4 , proceed as
follows:
1. Press button A11 , to release the dust container A10 . Take the dust
container A10 off the motor unit.
2. Out of the dust container
A10
, remove the outer filter
A19
and the
inner filter A18 .
Assembling and disassembling the upright vacuum
cleaner
For reasons of safety during transport, the upright vacuum cleaner is
supplied disassembled.
1. Attach the handle of the upright vacuum cleaner
A1
to the body of
the vacuum cleaner A3 so that the handle is aligned with the hole in
the body of the vacuum cleaner. Insert the supplied screw A7 into the
hole and screw it in properly – see figure
B1
. Check than the handle is
correctly attached and not moving in any way.
2. Into the free space in the body of the vacuum cleaner A3 , insert the
hand vacuum cleaner
A4
by first inserting the suction hole
A17
into the
bottom part of the body of the vacuum cleaner A3 and then carefully
tilt down the handle A15 until you hear a click.
3. Insert the floor nozzle
A6
into the suction hole
A17
of the hand vacuum
cleaner – see figure B2 until you hear a click.
4. If you need to disassemble the upright vacuum cleaner, first remove
the hand vacuum cleaner
A4
from the body
A3
by pressing button
A8 . Then press button A5 to release the floor nozzle A6 . Finally screw
out the locking screw A7 and carefully pull out the handle A1 from the
body of the vacuum cleaner
A3
.
Assembling the charging base
■
For reasons of safety during transport, the charging base
A20
is
supplied disassembled.
■ Insert the vertical part of the charging base into the horizontal part –
see figure
C1
, until you hear a click.
■ If you need to disassemble the charging base A20 , first press the button
in the bottom part of the charging base A20 – see figure C2 . Then you
can slide out the vertical part.
CHARGING THE VACUUM CLEANER
■
Place the assembled charging base
A20
on an even, dry and stable
surface within reach of a power socket.
■ Insert the power adapter plug A22 into the socket on the underside of
the charging base
A20
. Plug the power adapter plug
A22
into a power
socket.
■ Turn off the upright vacuum cleaner and set it to the vertical parking
position. Insert it into the charging base – see figure
D
.
■ After insertion into the charging base A20 , the built-in battery will
start being charged and the battery level indicator A12 will indicate
the charging level. A full charge requires approximately 4.5 hours. The
actual charging time depends on the power level of the battery.
■ When the charging process is completed, all the LED diodes of the
indicator
A12
will be lit. Disconnect the power adapter
A22
from the
power socket.
■ The LED diodes of the battery level indicator A12 indicate the charge
level of the battery. The individual LED diodes will turn off as the battery
gradually discharges. When the battery is almost flat, the bottom
LED diode will start flashing. When it turns of completely, the battery
is completely flat.
Note:
Prior to starting recharging, it is important for the vacuum
cleaner to be turned off and standing in the vertical parking
position. Do not turn on the vacuum cleaner when it is being
recharged and the power adapter
A22
is connected to the
power socket.
Note:
This vacuum cleaner contains a Li-ion battery. To ensure the
longest possible lifetime of the battery, we recommend:
- Do not unnecessarily leave the battery fully charged or
completely flat for too long.
- Do not keep the battery permanently fully charged. Its
lifetime will be extended by keeping it at approximately
half charge.
- Do not fully discharge the battery.
Note:
Charging base and power adapter are sold separately.
PARKING POSITION OF THE VACUUM CLEANER
■
Put the upright vacuum cleaner into the parking position by placing the
tip of your foot on top of the floor nozzle A6 and with a simple forward
movement of the handle secure the vacuum cleaner in the vertical
position. The latch located at the front on the elbow of the floor nozzle
A6 will slide into the groove on the top cover of the floor nozzle A6 .
■ To release the upright vacuum cleaner from the parking position, place
the tip of your foot on top of the floor nozzle
A6
and tilt the handle
backwards. The latch located at the front on the elbow of the floor
nozzle A6 will slide out of the groove on the top cover of the floor
nozzle
A6
.
USING THE VACUUM CLEANER
Upright vacuum cleaner
■ You may use the upright vacuum cleaner for vacuuming various types
of floor coverings such as for example hard floor coverings, carpets, etc.