Vacuum Cleaner
SVC 52BK / SVC 52GR / SVC 52WH
EN
EN-7
Copyright © 2019, Fast ČR, a.s.
Revision 08/2019
Adjusting the floor inlet nozzle according to the floor surface.
You may set the inlet nozzle according to the floor surface by adjusting the inlet flap:
•
If you want to vacuum carpets, close the bristles of the inlet inside the inlet nozzle, by turning the
flap accordingly.
•
If you want to vacuum hard and smooth surfaces, move the bristles out of the nozzle, by turning
the flap accordingly.
Turning your vacuum cleaner on and off
To switch your machine on or off, press the START / STOP button on the vacuum cleaner body.
Adjusting the suction strength
Suction can be controlled by a sliding flap on the hose handle.
Tip:
If the hose holder becomes blocked when vacuuming, disconnect it from the tube and also
disconnect the hose from the vacuum cleaner body. Then place the holder inside the suction hole
on the vacuum cleaner body and vacuum the stuck dirt out.
Temporary interruption of the vacuuming process
If you wish to interrupt vacuuming for a short time, using the lug place the floor nozzle into the parking
position in its rear part.
Note:
Do not move the vacuum cleaner from place to place if the hose is in the parked position!
You may brake off the parking position holder!
Using your accessories
A space for the combination nozzle is located in the bottom part of the vacuum cleaner.
The combination nozzle may be used to vacuum in hard-to-reach spaces such as window frames,
libraries, upholstery corners, joints, etc.). By turning the brushes out you get a brush nozzle suitable for
vacuuming e.g. dust from smaller types of surfaces, grills, keyboards, etc.
C
Ending the vacuuming process
When you finish vacuuming, switch the vacuum cleaner off by pressing the START / STOP button and
then disconnect the power cord plug from the socket.
To wind the power cord back to the vacuum cleaner, press and hold the winding button with one hand.
Hold the cable with your other hand to protect the vacuum cleaner input area from damage.
