Sencor STX 046, Translation Of The Original Manual

Page: 10 / 12

- 4 -
Revision 09/2022
Copyright © 2022, Fast ČR, a.s.
USING THE ACCESSORIES
• The chopping accessories can be used for chopping tougher
ingredients such as nuts, herbs, cheeses, fruit and vegetables in their
raw state or even well diced meat. It is suitable for preparing purée
and baby food.
• The chopping accessories can be used for grating, peeling and
slicing practically all types of fruits and vegetables. Carrots, potatoes,
cabbage, cucumbers, zucchini, beetroot, mushrooms, onions, etc. can
be cut into slices.
• Cut the food into pieces that are suitable for insertion into the feed
tube.
• Make sure that the accessories are correctly assembled and secured
on the food processor, and that the control knob is set to the OFF
position. Connect the power cord of the food processor to a power
socket.
• Set the control knob of the food processor to the highest speed (MAX).
In the case of soft food, you can also use a lower speed.
• If you wish to increase the speed to maximum speed for a short while,
set the control knob to the P position (Pulse). Do not leave the food
processor running in this mode for longer than 30 seconds, there is
a risk of overheating.
• Insert the individual foods or food pieces into the feed tube and
gently push them down into the bowl using the pusher. Do not push
excessively on the pusher so that the motor unit of the food processor
is not overloaded.
Warning:
Always use only the supplied pusher to push food
into the feed tube. Never use your fingers or other
utensils!
• Insert the food evenly. If you need to process a large amount of food,
process it in small batches and always empty out the bowl between
the individual batches.
• When you have finished using the grating accessory, move the
pusher up and down a few times. This will reduce the amount of food
that gets stuck in the attachment.
• Clean out the used accessories after each use according to the
instructions in chapter CLEANING AND MAINTENANCE .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FOOD PREPARATION AND PROCESSING TIPS
• Use only fresh foods.
• Slice large pieces into smaller ones so that they fit into the feed tube.
• First cut cabbage up into section chunks and remove the cabbage
stalk.
• Insert food into the feed tube gradually and evenly.
• To move the food through the feed tube into the bowl, always use the
pusher, moving it slowly and without exerting excessive downward
force.
• When processing a large amount of food, check that it is not
accumulating underneath or above the attachment (only for grating
accessories).
• To process softer foods, such as for example cucumbers, we
recommend setting the speed to low or medium. To process harder
foods, for example carrots or hard cheeses, set the speed to medium,
higher or maximum speed.
• When chopping hard cheeses or chocolate, do not leave the food
processor running for a long time. The chopping action excessively
heats up the ingredients, makes them soft and they may form into
clumps.
• In the event that the attachment becomes clogged with food, always
first turn off the food processor and disconnect it from the power
socket. Then remove the bowl, disassemble the accessories and
clean the attachment. Reassemble the accessories, mount them on
the food processor and after connecting it to mains power, continue
in your activity.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CLEANING AND MAINTENANCE
Warning:
Prior to any cleaning or maintenance, always turn
off the robot, disconnect it from the power socket
and remove the accessories from the food processor.
Never clean accessories that are mounted on the
food processor.
To clean the used accessories and its parts, never
use chemicals, dishwashing abrasive wool, steel
wool or cleaning products with abrasive components.
Otherwise the surface of the parts may be damaged.
• We recommend cleaning the accessories and its individual parts as
soon as possible after use, before the food scraps dry on. These are
harder to remove later.
• Thoroughly wash the used removable parts after every use in warm
water using a neutral dishwashing detergent. Then rinse these parts
with clean water and allow them to dry naturally or dry them out their
using a wiping cloth.
Warning:
When cleaning the chopper and attachments, be very
careful not to injure yourself on their sharp edges.
• Regularly clean the gearbox unit on the underside of the bowl. Turn
the bowl upside down and insert the key
A14
into the part of the bowl
used for mounting to the food processor. Turn the key clockwise to
release the gearbox unit, take the key out and remove the unit from
the bowl. Also take out the gasket seal of the unit.
• Clean dust and other dirty material from the gearbox unit and the
gasket seal.
• Put the gasket seal back on and slide the gearbox unit back in. Put the
key on to the unit and turn it anticlockwise to secure the unit in place.
• After removing the key, check with your hand that the unit is correctly
attached and that it is not possible to pull it out from the underside of
the bowl.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STORAGE
• When you have finished using the accessories and its parts, store
them in a clean, dry place out of children's reach. Do not expose
the stored accessories to extreme temperatures, direct sunlight and
excessive humidity and do not store it in an overly dusty environment.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF
USED PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your
municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that
used electric or electronic products must not be added to
ordinary municipal waste. For proper disposal, renewal and
recycling, hand these appliances over to determined
collection points. Alternatively, in some European Union
states or other European countries you may return your
appliances to the local retailer when buying an equivalent
new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human
health, which could result from improper waste disposal. Ask your local
authorities or collection facility for more details.
In accordance with national regulations penalties may be imposed for the
incorrect disposal of this type of waste.