Sencor STM 7900 Translation Of The Original Manual Download Page 11

- 11 -

 

04/2021

 Copyright © 2021, Fast ČR, a.s.

Mounting the grater on to the stand mixer

 ■

Make sure that the stand mixer  is disconnected from the power socket. The multi-

function head must be tilted down in the horizontal position and the beater, whisk 

or kneading attachments must be removed. 

 ■

Remove the front cover 

A1

 from the multi-function head. Tilt the assembled grater 

to the right at an angle of 45°, push it against the front attachment hub 

A12

 and 

turn it anticlockwise to set it into the operating position. The operating position is 

indicated by button 

A11

 popping out and an audible click.

Note:

The stand mixer  is equipped with a safety mechanism that prevents it 

from being started unless the grater is properly mounted and secured on 

the front attachment hub.

Using the grater

 ■

The grater is intended for processing practically all types of fruit, vegetables and 

other foods normally used in the household.

 ■

Prepare the food and cut it into pieces that will pass through the top feed tube of 

the grater. Kernels and stones may need to be removed from certain types of fruit 

and vegetables.

 ■

Place a suitable container underneath the grater for capturing the processed food.

 ■

Insert the power plug into a power socket. Use the control knob to set the desired speed.

 ■

Start by gradually placing ingredients into the feed tube. Use the supplied pusher to 

push ingredients through the feed tube 

E1

.

Warning:

Do not use fingers or other items to push in the food. Always use 

the pusher 

E1

 designed for this purpose.

 ■

Always insert the individual pieces of ingredients into the feed tube, and with 

appropriate force gently push down on the pusher. During operation, ensure that 

the ingredients are passing through the attachment by looking into the feed tube.  

Never fill the feed tube up to its top edge with ingredients. Processing large amounts 

of ingredients at once may overload the multi-function head of the stand mixer.

Useful advice for grating

 ■

To achieve the best possible results, process fresh not overly ripened fruit. The same 

applies to vegetables.

 ■

Softer fruit such as strawberries can be put into the freezer for a few minutes prior 

to processing.

 ■

Semi-hard cheese will be processed better if placed it in a refrigerator over night or 

in a freezer for 30 minutes.

 ■

We do not recommend processing soft or already grated cheese as this could clog 

up the feed tube.

 ■

When using the fine grating cone or the slicing cone for long straight slices, push 

the ingredients through the feed tube gently. When using the coarse grating cone or 

the slicing cone for thick wavy slices, it is necessary to push the ingredients through 

with greater force.

Ending operation and disassembling the grater

 ■

After you have finished using the appliance, set the control knob to the OFF position 

and disconnect the power cord from the power socket.

 ■

When disassembling the grater, first remove the pusher. Then press the button 

A11

 

and remove the grater by turning it clockwise. After removing the grater, put the 

cover 

A1

 back in its place.

 ■

When disassembling the grater into its individual parts, proceed in the reverse 

sequence.

 ■

Clean out the grater and the used accessories after each use according to the 

instructions in chapter CLEANING AND MAINTENANCE.

CLEANING AND MAINTENANCE

Attention:

Prior to cleaning or maintenance, always disconnect the appliance 

from the power supply and allow it to cool down completely.

The stand and the multi-function head and its power cord are not 

intended for washing in a dishwasher.

Do not spray these parts with water or any other liquid or 

submerge them in water or any another liquid.

 ■

After using, thoroughly wash all the parts that come into contact with food 

(accessories 

B1

 to 

B5

, the complete blender 

C1

 to 

C5

, the complete grinder 

D1

 to 

D16

 and the grater 

E1

 to 

E7

) using warm water and a neutral kitchen detergent. 

Then rinse everything with clean water and allow it to dry naturally or dry it out 

thoroughly using a wiping cloth. After washing and drying, we recommend to coat 

the grinding blade 

D3

 and the grinding plates 

D4

D6

 and 

D7

 with cooking oil.

 ■

If you whisked egg whites, first rinse the stainless steel bowl and the used whisk 

under cold water. If you were to use hot water, the egg white remains would harden 

and their removal would be more difficult.

Attention:

Accessories 

B1

 to 

B5

, the metal parts of the meat grinder 

D1

 and 

the grater 

E2

 are not intended for washing in a dishwasher. Other 

removable parts may be washed in a dishwasher.

When washing the grinding blade 

D3

 and the blade assembly 

C4

 of the blender, take special care to avoid injury on the sharp 

cutting edges.

 ■

Clean the blending jar 

C3

 by filling it with 0.5 litre of clean water and a few drops of 

kitchen detergent and then assemble the blender and run it for 10 to 15 seconds. 

Then turn off the stand mixer , disconnect it from the power socket, and after the 

rotating parts have come to a stop, remove the blending jar assembly. Empty out 

the contents of the blending jar and then thoroughly rinse it out with clean water 

and wipe it dry.

 ■

Wipe the outer parts of the stand 

A5

 and the multi-function head 

A7

 using a lightly 

dampened wiping cloth or sponge.

Attention:

Never use chemicals, dishwashing wool, steel wool or cleaning 

agents with an abrasive component since these may seriously 

damage the surface of the multi-function head or the stand.

STORAGE

 ■

Before storing it, the appliance and its accessories must be completely cool, turned 

off and disconnected from the power supply, clean and dry.

 ■

Place the stainless steel bowl into the base on the stand and into it you can place 

the beater, whisk and kneading hood. Tilt the multi-function head to the horizontal 

position. Store the stand mixer  and all the accessories in a clean, dry place out of 

children's reach. 

Attention:

Keep the stored stand mixer  away from extreme temperatures, 

direct sunlight and excessive humidity and do not store it in an 

overly dusty environment. Do not place anything on to the stored 

stand mixer.

TECHNICAL SPECIFICATIONS 

Rated voltage range  .................................................................................................... 220−240 V AC

Rated frequency........................................................................................................................50-60 Hz

Rated power input .................................................................................................................... 1,500 W

Volume of the stainless steel bowl  .................................................................................................6 l

Volume of the glass blending jar ................................................................................................. 1.5 l

Noise level  ...................................................................................................................................85 dB(A)

The declared noise emission level of the appliance is 85 dB(A), which represents a level 

A of acoustic power with respect to a reference acoustic power of 1 pW.

Changes to text and technical parameters are reserved.

INSTRUCTIONS AND INFORMATION REGARDING THE 

DISPOSAL OF USED PACKAGING MATERIALS

Dispose of used packaging material at a site designated for waste in your municipality.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC 

EQUIPMENT

This symbol on products or original documents means that used 

electric or electronic products must not be added to ordinary 

municipal waste. For proper disposal, renewal and recycling, hand 

these products over to determined collection points. Alternatively, in 

some European Union states or other European countries you may 

return your appliances to the local retailer when buying an equivalent 

new appliance.

Correct disposal of this product helps save valuable natural resources 

and prevents potential negative effects on the environment and human health, which 

could result from improper waste disposal. Ask your local authorities or collection 

facility for more details.

In accordance with national regulations penalties may be imposed for the incorrect 

disposal of this type of waste.

For business entities in European Union states

If you want to dispose of electric or electronic equipment, ask your retailer or supplier 

for the necessary information.

Disposal in other countries outside the European Union.

This symbol is valid in the European Union. If you wish to dispose of this product, 

request the necessary information about the correct disposal method from the local 

council or from your retailer.

This product meets all the basic requirements of EU directives related to 

it.

Summary of Contents for STM 7900












Reviews: