Sencor SSK 160, User Manual

Page: 5 / 64

EN - 3
Package contents / device parts
1
Power cable / power plug
2
Feed-in slot for paper
3
Paper sensor
4
Extendable rail
5
Slide switch ( AUTO / OFF / REV )
6
LED ready indicator
7
Paper bin
General information
Reading and storing the user manual
This user manual accompanies this strip cut paper shredder (hereafter referred to as
“paper shredder”). It contains important information on start-up and handling. Before using
the paper shredder, read the user manual carefully. This particularly applies for the safety
notes. Failure to heed this user manual may result in severe injury or damage to the paper
shredder.
Store the user manual for further use. Make sure to include this user manual when passing the paper
shredder on to third parties.
Explanation of symbols
The following symbols and signal words are used in this user manual, on the paper shredder or on the
packaging.
This signal symbol/word designates a hazard with moderate degree of
risk which may lead to death or severe injury if not avoided.
This signal symbol/word warns of possible damage to property.
This symbol provides you with useful additional information regarding operation or
handling.
Declaration of conformity (see chapter “Declaration of conformity”):Products marked with
this symbol meet all applicable regulations for the European Economic Area.
The certified safety seal (GS mark) certifies that a product meets the
requirements of the German Product Safety Act (ProdSG). The GS mark
indicates that the safety and health of the user will not be jeopardised providing
the product is used properly, but also in case of foreseeable misuse. This is
a voluntary safety mark issued by TÜV Rheinland.
WARNING!
NOTICE!