- 6 -
Copyright © 2021, Fast ČR, a.s.
04/2021
continuously and do not consecutively use it more than 10 times.
Attention:
Do not use the steam function for silk and synthetics so as not
to damage the fabric.
DRIP-STOP SYSTEM
■
The iron is equipped with the Drip-Stop system, which automatically stops water
supply when the set temperature is insufficient for generating steam and thereby
prevents potential dripping of hot water out of the steam outlets.
TURNING OFF
■
Stand the iron upright and set the steam release selector to position
.
■
Set the temperature control knob to the MIN position.
■
Disconnect the power cord from the power socket and allow the soleplate to cool
down.
■
After the soleplate has cooled down, clean the iron according to the instructions in
chapter Cleaning and maintenance.
TRAVEL HANDLE POSITION
■
After use, the handle of the iron can be set to the travel position. Press button
A10
and tilt the handle downwards.
TIPS FOR QUALITY IRONING
■
If you are ironing fabrics from blended materials (e.g. 40 % wool and 60 % synthetic
material), set the temperature according to the material which is ironed at a lower
temperature.
■
If you do not know the composition of the fabric, identify the suitable temperature
setting by ironing a piece of the fabric from the underside. Start by setting a low
temperature and gradually increase it until the ideal temperatures is achieved.
■
Never iron over places that have sweat marks or other stains. The high temperature
fixes the stain in place, making it difficult to remove.
■
To avoid silk, wool and synthetic fabrics from being shiny after ironing, iron them
from the underside.
■
Some materials are easier to iron when they are lightly damp.
■
Spray fine fabrics before ironing them or iron them under a lightly dampened
wiping cloth.
CLEANING AND MAINTENANCE
CLEANING AFTER EVERY USE
Attention:
Before cleaning, the iron must be disconnected from the power
socket and cooled down.
Do not submerge the iron in water when cleaning it.
■
Open the water tank cap and empty out the remaining contents of the water tank
over a sink. Close the cap.
■
In the event that the soleplate or the surface of the iron is dirty, wipe with a lightly
dampened cloth and then wipe dry.
■
For cleaning, do not use steel wool, solvents or cleaning products with an abrasive
effect, etc. to prevent damaging the surface being cleaned.
REMOVING LIMESCALE DEPOSITS
■
We recommend regularly removing limescale deposits from the inner parts of the
soleplate.
■
Fill the water tank with clean water up to the maximum water level mark. Connect
the iron to a power socket, set the steam release selector to position
and the
temperature control knob to the MAX position. Wait until the heating indicator turns
off.
■
Hold the iron in a horizontal position above the sink. Press the steam impulse button
. Steam and hot water will start to be released from the soleplate. At the same
time also limescale deposits from the inner parts of the soleplate will be removed.
Repeat this procedure until the water tank is completely empty.
■
Set the steam release selector to position
and iron over a piece of unneeded
fabric to remove any water stains that may have formed on the soleplate during
the cleaning process.
■
Unplug the iron from the power socket and allow it to cool down.
STORAGE
■
After you have finished ironing, pour out any unused water from the water tank
(careful, it may be hot), or allow it to evaporate if necessary and allow the iron to cool
down. Set the steam release selector to position
.
■
Press button
A10
and tilt the handle downwards to the travel position.
■
Locate the power cord so that it is not touching the soleplate.
Attention:
Keep the stored iron away from extreme temperatures, direct
sunlight and excessive humidity and do not store it in an overly
dusty environment. Do not place anything on to the stored iron.
TECHNICAL SPECIFICATIONS
Rated voltage range ......................................................................................110-120 V /220–240 V
Rated frequency........................................................................................................................50/60 Hz
Rated power input ...........................................................................................................900-1,100 W
Continuous steam output .................................................................................................... 20 g/min
Water tank capacity ..................................................................................................................... 75 ml
Dimensions (length × width × height) ........................................203 mm × 96 mm × 90 mm
Weight ................................................................................................................................................ 750 g
Changes to text and technical parameters are reserved.
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty
insulation.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF
USED PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling hand over
these appliances to determined collection points. Alternatively, in
some European Union states or other European countries you may
return your appliances to the local retailer when buying an equivalent
new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human health, which
could result from improper waste disposal. Ask your local authorities or collection
facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier
for the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.
