EN - 8
EN - 9
3. Set the Clock setup to Manual (Radio is the default).
4. To select an option, press SELECT.
5. If another nested option is available under the option, repeat steps 2
through 4.
Backlighting
Adjusting the backlight only works on AC power.
In the standby mode, press and hold MENU for 1-2 seconds, then press
TUNE +/- to adjust the backlight level (in the range of 0-10)
DAB+/FM ANTENNA
Before using your radio to receive DAB + or FM broadcasts, fully extend
the telescopic antenna located on the back of the unit and ensure the best
possible conditions for FM / DAB signal reception.
You may need to adjust the position of the telescopic antenna to ensure
maximum signal strength.
When using your radio for the first time, the unit performs a complete DAB
station search.
Listening to DAB+ radio
Digital Audio Broadcasting (DAB+) is a type of digital radio broadcast through
a network of transmitters. It offers more options, better sound quality and
more information.
1. Press the FUNCTION button repeatedly to select DAB radio.
A [Scanning…..] message will be shown. (Scanning…).
2. Press the SCAN button to start the full scan.
The unit automatically stores all DAB + radio stations, then tunes in the
broadcast of the first available station.
3. The station list will be stored in the radio. The next time the unit is
switched on, the stations are no longer scanned.
4. If no DAB + station is found, [Not available] or [No Signal] will appear on
the display.
To tune to a DAB + station from the list of available stations:
- In the DAB mode, press the TUNE +/- button to browse through the
available DAB+ stations.
