EN - 7
Remote Control
Battery Installation
Battery Replacement
If the distance required between the remote control unit and main unit decreases, the battery is
exhausted. In this case, replace the battery with a new one.
Precautions concerning batteries
Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.
The remote control battery is already installed at the factory. When the remote control stops
operating, replace the battery with a new one.
Open the battery door.
Insert a
ಯ
CR2032
ರ
3-volt lithium battery. Make sure the polarity
(the + and - side of the battery) is correct.
Close the battery door.
3
2
1
CR2032
1
2
3
The provided Remote Control Unit allows the unit to be operated from a distance.
When operating the remote control unit, point it towards the remote sensor on the front panel of the
unit.
Even if the remote control unit is operated within the effective range (5m), remote control operation
may be impossible if there are any obstacles between the unit and the remote control.
If the remote control unit is operated near other products which generate infrared rays, or if other
remote control devices using infrared rays are used near the unit, it may operate incorrectly.
Conversely, the other products may also operate incorrectly.
Summary of Contents for SPT-600
Page 2: ......
