09/2017
- 3 -
Copyright © 2017, Fast ČR, a.s.
■
As a result of residual heat, accessible surfaces of the appliance are hot during its use and afterwards. Do
not touch the hot surface. Use the thermally insulated handles to handle the appliance.
■
Steam may be released from around the lid during use. Pay increased attention to avoid scalding.
■
Be especially careful when handling hot liquids and foodstuffs. Hot steam or splashing hot foods and
liquids may cause scalding.
■
Do not turn on the appliance when it is empty. Incorrect use may negatively affect its lifetime. For the event
that it is accidentally started, the appliance is equipped with a thermal fuse that will turn it off in the case of
overheating in order to prevent its damage. It is necessary to allow the appliance to cool down for at least
30 minutes before using it again. Do not pour liquids into the boiler immediately after it was turned off.
■
Do not pour icy cold water into the appliance when it is hot. Otherwise, the enamelled surface of the
boiler could crack.
■
Always turn off and disconnect the appliance from the power socket when not using it, and when leaving
it without supervision, before moving and cleaning it. Allow the appliance to cool down before moving
or cleaning it.
■
Do not move the appliance when it is filled with hot liquid or canning jars.
■
Keep the appliance clean. Clean it according to the instructions in chapter Cleaning and maintenance.
Do not submerge the appliance in water or wash it under a current of running water.
■
Ensure that the power plug contacts do not come into contact with water or moisture. Do not place heavy
items on the power cord. Make sure that the power cord does not hang over the edge of a table or that
it is not touching a hot surface.
■
Disconnect the appliance from the power socket by gently pulling the plug of the power cord, and not
the power cord itself. Otherwise, this could damage the power cord or the socket.
■
If the power cord is damaged, it must be replaced by an authorised service centre or by another similarly
qualified person, this will prevent the creation of a dangerous situation. It is forbidden to use the appliance
if it has a damaged power cord.
■
Do not use the appliance when it is not functioning properly or showing any signs of damage. In order to
prevent a hazardous situation arising, do not repair the appliance yourself or modify it in any way. Have
all repairs performed at an authorised service centre. By tampering with the appliance, you risk voiding
your legal rights arising from unsatisfactory performance or quality warranty.
