3.8 Channel Scan
5.2 Low Battery Meter Indicator
Your radio can scan the 8 channels to any activity. This allows to find
The PMR can detect the low battery level when battery
other radios without having to change the channel.
voltage goes low. The battery icon will display the low
To activate this feature:
battery status as follows.
a. Press and old the and button at the same time and channel
When battery voltage at low battery level. The empty battery
symbol will appear at this stage and continue to blink
scanning will start immediately, with SC displayed on the
The battery icon will continue to blink until it totally drain
screen and the channel number cycling through the channels.
the battery voltage.
When a signal is detected, the unit will pause on that channel, while
receiving the signal and for a further 3 seconds.
Note: To have good communication, once the battery reach
in low battery level, replace the batteries into new ones.
b. Press the PTT button to stop scanning and talk on that channel,
or press the or button to manually start the scanning.
c. To stop the scanning, press the button and return to
5.3 Microphone/Earphone/Charger Jack
standby mode.
The SMR 130 is equipped with and auxiliary microphone, earphone,
and charge jack located at the opposite side of PTT button.
3.9 Monitor Feature
Note: It requires a microphone/earphone
with a 2.5mm, 3-pole
You can use the Monitor feature to check for weaker signals in the
jack connector and this is not supplied with your SMR 130.
current channel.
a. Press and hold the and button at the same time. The
5.4 Using a Hands free kit (Headset)
receiving icons “RX” appears on the display.
You can plug a hands free kit into the
Your handset will pick up any signals on the current channel.
right side of your FX-238 handset. With
b. Press the button to stop the monitoring
hands free kit, by pressing the PTT button
4.0 To Lock the Buttons
to transmit and talk with other radios
With the buttons lock you can still transmit (TX), or call the current
channel, but you can not change the volume. To activate this
5.4 Specifications
feature;
In the standby mode, press and hold the until the
icon appears on the LCD screen.
To unlock the buttons
Press and hold again the button until the icon
disappears on the LCD screen.
Channel Frequency Table
5. Auxiliary Features
5.1 Power Saving
Your PMR unit has special circuitry designed to extend the life of
your battery. When the unit is not used for 4 seconds, it will
automatically switch into a low power mode. The Power
feature does not affect the PMR ability to receive
transmissions. When a signal is detected, it automatically
returns to full power mode.
Channels Available
8 Channels
Output Power (TX)
0.5 W
Range
Up to 5 Km.
Channel
Frequency (MHz)
Channel
Frequency (MHz)
1
446.00625
5
446.05625
2
446.01875
6
446.06875
3
446.03125
7
446.08125
4
446.04375
8
446.09375
