background image

EN 51

EN

 06/2016

 2016

EN

  Warranty conditions

Warranty card is not a part of the device packaging. 

This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty 
is limited to the following conditions. Warranty is referred only to the customer goods using for common 
domestic use. The claim for service can be applied either at dealer’s shop where the product was bought, or 
at below mentioned authorized service shops. The end-user is obligated to set up a claim immediately when 
the defects appeared but only till the end of warranty period. The end user is obligated to cooperate to certify 
the claiming defects. Only completed and clean (according to hygienic standards) product will be accepted. 
In case of eligible warranty claim the warranty period will be prolonged by the period from the date of claim 
application till the date of taking over the product by end-user, or the date the end-user is obligated to take it 
over. To obtain the service under this warranty, end-user is obligated to certify his claim with duly completed 
following documents: receipt, certificate of warranty, certificate of installation.

This warranty is void especially if apply as follows:

  Defects which were put on sale.
  Wear-out or damage caused by common use.
  The product was damaged by unprofessional or wrong installation, used in contrary to the applicable 

instruction manual, used in contrary to legal enactment and common process of use or used for another 
purpose which has been designed for.

  The product was damaged by uncared-for or insufficient maintenance.
  The product was damaged by dirt, accident of force majeure (natural disaster, fire, and flood).
  Defects on functionality caused by low duality of signal, electromagnetic field interference etc.
  The product was mechanically damaged (e.g. broken button, fall).
  Damage caused by use of unsuitable media, fillings, expendable supplies (batteries) or by unsuitable 

working conditions (e.g. high temperatures, high humidity, quakes).

  Repair, modification or other failure action to the product by unauthorized person.
  End-user did not prove enough his right to claim (time and place of purchase).
  Data on presented documents differs from data on products.
  Cases when the claiming product cannot be indentified according to the presented documents (e.g. the 

serial number or the warranty seal has been damaged).

Authorized service centers

Visit www.sencor.eu for detailed information about authorized service centers. 

Summary of Contents for SLE3217TC























































Reviews:

Related manuals for SLE3217TC