EN 3
EN
Revision 06/2021
Copyright © 2021, Fast ČR, a. s.
Important safety instructions
•
This device shall not be kept in a closed area, such as a library or shelf, provided
sufficient ventilation cannot be provided or the manufacturer's instructions cannot be
followed.
•
Do not place any objects into the air vents or any other holes. Risk of touching
components with dangerous voltage or shorting parts that could cause fire or electric
shock. Do not pour any liquids into the device. Do not install the device in direct
sunlight, or close to heat sources, like radiators, heat exchangers, stoves or other
appliances (including amplifiers) producing heat. High temperatures shorten the life of
the electronic components of the device significantly. Do not use and do not leave the
device near an open fire.
•
The device must not be exposed to dripping or running water and you must not place
upon it objects filled with liquid, e.g. vases. Protect the device against becoming wet,
sprayed on or poured on by any liquid, do not leave or install the device outdoors. Do
not use the device outdoors. You risk electric shock or fire by not adhering to these
instructions.
•
Do not use the device close to water.
•
Handle the glass panels and cover of the device with care. The glass screen can
break on impact and cause serious injury.
•
Make sure the power cord is not stepped on or compressed, especially near the plug
and point leading from the device or adapter. The power plug (adapter) is used to
disconnect the system and must be easy to access.
•
Do not use a device with a damaged power cord or plug. If the power cord or plug is
damaged, turn off the device, disconnect it from the power supply and contact your
authorized repair shop. Only a professional can replace a damaged power cord or
plug. Under no circumstances should you attempt to replace the power cord or plug
yourself.
•
Do not attempt to bypass the safety function of the polarized plug. If the plug cannot
be plugged into your socket, refer to an electrician to replace your obsolete socket.
Before plugging the device into the socket make sure the voltage in your socket
corresponds with the voltage on the label of the device or power adapter. If you are
not sure of the type of power source you have in your home, refer to your vendor or
local power company.
•
Before switching, make sure that all network connections are made properly and in
accordance with the manufacturer's instructions. Switch the device off and unplug it
from the socket before plugging in or changing the connection of the device.
•
Remember to always unplug the plug (adapter) from the socket before unplugging
the power cord.
•
Plug the power cord into an independent socket. Do not overload wall sockets using
extension cords or unified sockets. Risk of electric shock.
•
Hold the power cord by the plug and not by the cable when pulling out from the
socket.
