background image

6 EN

EN

Revision 10/2022

Copyright ©

 

2022, Fast ČR, a. s.

Important safety instructions

• 

In the event of any unusual occurrences during the use of the device, e.g. smelling 
the characteristic smell of burning insulation or even seeing a smoke, turn the device 
off immediately, disconnect the power supply and wait with continuing use of the 
device until you learn the result of its inspection by the service personnel.

• 

Leave all service to qualified service personnel. Service is necessary when the device is 
damaged in any way, for example in case of damage to the power cord, spilling liquid 
on the device, intrusion of foreign objects into the device, when the device is exposed 
to rain or moisture, if the device does not function in the usual manner or if it fell.

• 

When repairing or replacing a component of the device, make sure the repair 
technician used spare parts defined by the manufacturer to ensure the replaced 
components have the same features as the original. Unauthorized replacements can 
cause fire, electric shock or other risks.

• 

Prior to cleaning, moving or other maintenance work, unplug the cord (adapter) from 
the socket.

• 

Clean the device with a dry cloth only. Do not use gasoline, thinner or other solvents 
or abrasives, scouring pads, or sponges with scouring pads to clean the device.

Note:

Do not throw the device into your common household waste. Respect laws and 
regulations when disposing of the machine.

Remote controller and battery

• 

Do not expose the remote controller or battery to direct sunlight, or close to heat 
sources, like radiators, heat exchangers, stoves or other appliances (including 
amplifiers) producing heat. Do not use and do not leave the device near an open fire. 
Make sure the sensor is not exposed to intense light (e.g. sunlight) or fluorescent tube 
light, which could lower the efficiency and reliability of the remote controller.

• 

The remote controller or battery must not be exposed to dripping or running water 
and objects filled with liquid, e.g. vases, shall not be placed on the device. Protect the 
remote controller against becoming wet, sprayed or poured on by any liquid. Do not 
use outdoors. Failure to respect these instructions can lead to the remote controller or 
battery becoming damaged.

• 

Do not use the device close to water.

• 

The impact the battery disposal has on the environment shall be monitored carefully.

• 

Using the batteries incorrectly can result in leakage and corrosion. Follow the 
following instructions to ensure proper remote control operation:

 

Do not insert the batteries in the wrong direction.

 

Do not charge, heat, open or short the batteries.

 

Do not throw batteries into a fire.

 

Do not leave dead batteries in the remote controller.

 

Do not combine various types of batteries or old and new batteries.

 

If you do not use the remote controller for a longer period of time, remove the 
batteries to prevent damaging the remote controller by the batteries leaking out.

Summary of Contents for SLE 43FS602TCS


































Reviews: