Sencor SLA 200, User Manual

Page: 4 / 6

EN-2
4 . When the machine has reached operating temperature, you may insert the pouch, (sealed edge
fi rst), squarely into the machine until it engages with the rollers.
Never insert a pouch open edge fi rst into the machine.
5 . The pouch will move through the machine and exit at the rear.
6 . During the process the READY light may go out as heat is absorbed by the laminating pouch.
This is normal.
7 . Do not cut down Laminating Pouches to Laminate smaller sizes of Paper, smaller sizes of
Pouches are available, see below, please use these.
8 . Turn the laminator to OFF (O) after use.
9 . Always remove the plug from the power supply, when the Laminator is not in use.
IMPORTANT!
Do not touch the top of the machine during use, as it will get very hot and take approximately
3–4 hours to cool down. Do not place items on top of the machine at any time.
Laminating Pouch Sizes
A4 – 303 × 216 mm
A5 – 216 × 154 mm
A6 – 154 × 110 mm
A7 – 80 × 111 mm
ID Card – 90 × 60 mm
Credit Card – 86 × 54 mm
Laminating capacity
The SLA 200 is a personal laminator designed for hot lamination so is only suitable for home and
small of
fi ce use only. Do not use the appliance with pouches thicker than 160 microns in thickness.
Maximum Lamination thickness is 0.45mm, excluding the pouch.
How to load a laminating pouch
The laminating pouch is sealed along one side. Open the pouch and place the paper to be laminated
centrally inside the pouch as close to the sealed edge as possible.
Ensure there is an equal border all round the paper (e.g.: A4 paper should have a 3mm border).
The sealed edge (not the open edges) is placed into the entry slot to start the lamination process.
Always watch the pouch during the Laminating process to ensure it comes out the other side of the
Laminator.
It may wrap around the rollers if not placed squarely and centrally in the entry slot.
In the unlikely event the pouch becomes jammed in the Laminator, please switch off, do not open the
appliance. Only a quali
fi ed service engineer should repair the appliance.
Warranty & service
Never service the product yourself. The appliance is guaranteed for 12 months from date of
purchase, subject to normal use. If the laminator is under warranty then return it to the point of
purchase for replacement or repair.