Sencor SCE 2100BK Translation Of The Original Manual Download Page 6

- 6 -

 

10/2019

 Copyright © 2019, Fast ČR, a.s.

EN

Coffeemaker

User's manual

 ■

Prior to using this appliance, please read the user's manual thoroughly, even in cases, 

when one has already familiarised themselves with previous use of similar types of 

appliances. Only use the appliance in the manner described in this user’s manual. 

Keep this user's manual in a safe place where it can be easily retrieved for future use. 

 ■

We recommend saving the original cardboard box, packaging material, purchase 

receipt and responsibility statement of the vendor or warranty card for at least the 

duration of the legal liability for unsatisfactory performance or quality. In the event 

of transportation, we recommend that you pack the appliance in the original box 

from the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 

Filter holder

A2 

Coffeemaker unit

A3 

Glass cups

A4 

Coffeemaker base

A5 

Water tank lid

A6 

Water tank

A7 

ON button

Not shown

A8 

Ground coffee filter

BEFORE FIRST USE

 ■

Before first use, take the appliance and its accessories out of the packaging material 

and remove all promotional labels and stickers. Check that neither the appliance nor 

any of its parts is damaged.

 ■

Thoroughly wash the filter holder 

A1

, ground coffee filter 

A8

 and glass cups 

A3

 in 

warm water with a small amount of neutral dishwashing detergent. Rinse under clean 

running water and dry well. Put these parts back into the coffeemaker. Ensure that all 

the accessories are completely dry.

 ■

Wipe the coffeemaker with a soft sponge lightly dipped in warm water. Then wipe 

with a dry wiping cloth.

Putting the coffeemaker into operation

Before first use or after an extended period of time when the coffeemaker was not used, 

it is important to clean the coffeemaker with clean water without any ground coffee in 

the filter. Proceed as follows:

1.  Insert the power plug into a power socket.

2.  Tilt open the lid 

A5

 and pour cold fresh water into the water tank 

A6

. Close the 

water tank lid 

A5

.

3.  Ensure that the filter 

A8

 without ground coffee is inserted in the holder 

A1 

and that 

the holder 

A1

 is correctly inserted in the coffeemaker.

4.  Insert a cup into the base 

A4

.

5.  Press the ON button 

A7

 and the process where water drips into the cup will start 

within a few short moments.

6.  Wait until all the water in the water tank flows through the filter into the cup.

7.  If necessary, repeat this process two to three times.

Then the coffeemaker is clean, warm and ready for use.

Note: 

During the cleaning and coffee brewing process, you will hear a rattling 

noise. This noise is made by the pump and this is normal.

OPERATING THE COFFEEMAKER

1.  Open open the lid 

A5 

and pour the necessary amount of cold fresh water into the 

water tank 

A6

. Ensure that the water level does not exceed the maximum water 

level mark.

2.  Slide out the holder 

A1

 and pour a sufficient amount of ground coffee into the 

filter 

A8

. Use ground coffee specifically intended for this type of appliance 

exclusively. As a rule, you will need a full tablespoon of ground coffee for a single 

cup of coffee. Nevertheless, the amount of ground coffee can be modified to suit 

one's preferences. Slide the holder 

A1

 back into the coffeemaker.

3.  Insert a cup / cups 

A3

 into the base 

A4

. Check that they are correctly positioned.

4.  Turn on the coffeemaker by pressing the ON button 

A7

.

5.  After a short moment the coffee will start dripping into the cup.

6.  As soon as the coffee brewing process is complete, turn off the coffeemaker and 

wait approximately 1 minute before removing the cups.

Note: 

Allow the coffeemaker to cool down for approx. 10 minutes before using 

it again. Otherwise, there is a risk of it overheating and subsequent 

damage.

7.  When not using the coffeemaker, disconnect the power plug from the power 

socket. Allow the coffeemaker to sufficiently cool down and then clean it according 

to the instructions in chapter "

Cleaning and maintenance

".

CLEANING AND MAINTENANCE

Disconnect the power plug from the power socket and allow the appliance to cool 

down before cleaning it.

For cleaning, do not use cleaning products with an abrasive effect, solvents, etc. that 

could damage the appliance. No part of this appliance is intended for washing in 

a dishwasher.

Warning:

To prevent the risk of injury by electrical shock, do not submerge 

the appliance, power cord or power plug in water or any another 

liquid.

Cleaning the filters

Before removing the filter 

A8

, check that it has cooled down completely. It may be 

very hot during the coffee brewing process as well as afterwards. Remove the used 

coffee from the filter 

A8

. This can be thrown out with household waste or composted.

Carefully wash the filter 

A8

, holder 

A1

 in warm water with a small amount of neutral 

kitchen detergent. Rinse under clean running water and dry thoroughly.

Cleaning the outer surface of the coffeemaker

Before cleaning the outer surface, make sure that the coffeemaker has cooled down 

completely. Wipe the external surface of the coffeemaker using sponge lightly dipped 

in warm water. Wipe dry using a clean wiping cloth.

Removing limescale deposits

Over time, limescale deposits may form in the coffeemaker, which may negatively 

affect the flavour of the brewed coffee and shorten the lifespan of the coffeemaker. It 

is important to regularly remove limescale deposits.

1.  Pour a  solution of water and descaling agent into the water tank 

A6

 up to the 

maximum mark. Follow the instructions on the packaging of the agent.

Note: 

The descaling agent can be purchased in standard retail chains. Always 

use a descaling agent intended for home coffeemakers. Alternatively, 

citric acid or an 8% white vinegar solution in the recommended 2:1 ratio.

2.  Insert a cup or bowl into the base 

A4

.

3.  Ensure that the filter 

A8

 without ground coffee is inserted in the holder 

A1 

and that 

the holder 

A1

 is correctly inserted in the coffeemaker.

4.  Turn on the coffeemaker by pressing the ON button 

A7

.

5.  After a short moment the solution will start dripping through.

6.  Wait until all the water in the water tank flows through the filter 

A8

.

7.  Once the water tank 

A6 

is empty, pour out the solution.

8.  Pour clean cold water into the water tank 

A6

 up to the maximum mark and again 

allow all the contents of the water tank to flow through the coffeemaker.

Storage

When not using the appliance for an extended period of time, disconnect the power 

plug from the power socket, allow the appliance to cool down and clean it according 

to the instructions provided above.

Before storing it, check that the appliance and all its accessories are thoroughly clean 

and dry. 

Store the appliance in a dry, clean and well-ventilated location not exposed to extreme 

temperatures and out of children's reach.

TECHNICAL SPECIFICATIONS

Rated voltage range ........................................................................................................220 – 240 V~

Rated frequency........................................................................................................................50/60 Hz

Rated power input .............................................................................................................420 – 500 W

Noise level ....................................................................................................................................70 dB(A)

The declared noise emission level of the appliance is 70 dB(A), which represents a level 

A of acoustic power with respect to a reference acoustic power of 1 pW.

We reserve the right to change text and technical specifications.

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF 

USED PACKAGING MATERIALS

Dispose of used packaging material at a site designated for waste in your municipality.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on products or original documents means that used electric 

or electronic products must not be added to ordinary municipal waste. 

For proper disposal, renewal and recycling hand over these appliances 

to determined collection points. Alternatively, in some European Union 

states or other European countries you may return your appliances to 

the local retailer when buying an equivalent new appliance.

Correct disposal of this product helps save valuable natural resources 

and prevents potential negative effects on the environment and human 

health, which could result from improper waste disposal. Ask your local authorities or 

collection facility for more details.

In accordance with national regulations penalties may be imposed for the incorrect 

disposal of this type of waste.

For business entities in European Union states

If you want to dispose of electric or electronic appliances, ask your retailer or supplier 

for the necessary information.

Disposal in other countries outside the European Union.

This symbol is valid in the European Union. If you wish to dispose of this product, 

request the necessary information about the correct disposal method from the local 

council or from your retailer.

This product meets all the basic requirements of EU directives related to 

it.

Reviews: