- 4 -
09/2022
2022,
.
Body parameters can be changed as follows:
Sequence
number
Gender
Height
Age
Body activity
1 to 12
Male/
Female
100 to 250 cm 10 to 100
Procedure for setting personal body parameters
1.
Turn on the scale by pressing the SET button. The default
parameters will appear on the display.
2. Using the
▲
/
▼
buttons, select the sequence number of the user
and press the SET button to confirm and skip to next step.
3. Using the
▲
/
▼
, select the gender male/female. The display will
show the respective icon. Press the SET button to confirm and skip
to the next step.
4. Using the
▲
/
▼
buttons, set the age of the user. Press the SET
button to confirm and skip to the next step.
5. Using the
▲
/
▼
buttons, set the age of the user. Press the SET
button to confirm and skip to the next step.
6. Using the
▲
/
▼
buttons, select the physical activity. The display will
show the respective icon. Press the SET button to confirm or wait a
few seconds until the display shows the set parameters. This saves
them to memory.
Note:
If you do not press any button during the setup process
within 6 seconds, the current parameters will automatically
be saved to memory and the scale will switch to the
weighing mode. "0.0" will appear on the display.
If "0.0" appears on the display during the setup process,
press the SET button to re-enter the settings.
Weighing with measurement and analysis of body parameters
1.
Turn on the scale by pressing the SET button. The display will show
the parameters of the preceding user/default parameters.
2. Using the
▲
/
▼
buttons, select the sequence number of the user
and press the SET button.
3. Wait a few seconds until "0.0" appears on the display.
4. Step on the weighing platform with both feet. It is important that you
stand on the electrodes barefoot.
5. The weight will be shown on the display and flash once. Then the
body parameters will be analysed and the measured values will be
shown on the display.
6. The scale will automatically turn off after a few seconds of inactivity.
Automatic user identification
• If the scale is turned off or is in stand-by mode, step on it and wait until
the weight appears on the display. At the same time, the weight is
compared with the information from all the users saved on the scale. If
the scale finds that the weight is the same or /- 2 kg then it will
automatically start the body parameter analysis. If it does not find the
same weight, it will automatically turn off after a few seconds and the
body parameter analysis will not be performed.
Note:
If you step on the scale wearing socks or shoes, or if
you are not standing properly on the electrodes, the
body parameters analysis will not start even if it finds a
corresponding weight of a stored user.
If the scale finds a weight that corresponds to two or more
users, it will select the user for whom the weight difference
is the smallest. If the scale finds two users with the same
weight, it will select the user with the lower sequence
number.
Displaying measured values
If you need to display the measured weight values and the body
parameter analysis, proceed as follows:
1.
Turn on the scale by pressing the SET button. The display will show
the parameters of the preceding user/default parameters.
2. Using the
▲
/
▼
buttons, select the user's sequence number and
wait a few seconds until "0.0" appears on the display.
3. Press the
▼
button to enter the measured values display mode.
4. Use the
▲
/
▼
buttons to scroll through the measured values.
5. After several seconds of inactivity, the scale will turn off
automatically.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USEFUL INFORMATION
Fat
• The measured fat value in % indicates the percentage of fat in the
human body.
• An optimal amount of fat ensures the proper function of physiological
processes in the human body, nevertheless, its excess worsens the
metabolic function and may be the cause of several illnesses or health
problems.
Fundamental principles
• When an electrical signal of a certain frequency passes through the
human body, the resistance of fat is greater than the impedance of
muscles or other body tissues. By means of a biological resistance
analysis a low voltage electrical current passes through the human
body at a standard frequency, and therefore the % of fat is the
difference in the resistance during the transmission of the electrical
signal through the body tissue.
Fat/water content assessment table
The values from the following table can be used as a reference.
Fat in %
Gender
Age
Skinny
Slim
Standard
Slightly
overweight Overweight
Male
10–17
<6 %
<9 %
<26 %
<30 %
≥30 %
18–39
<6 %
<11 %
<22 %
<27 %
≥27 %
40–59
<7 %
<12 %
<23 %
<28 %
≥28 %
≥60
<9 %
<14 %
<25 %
<30 %
≥30 %
Female
10–17
<10 %
<20 %
<37 %
<41 %
≥41 %
18–39
<11 %
<21 %
<35 %
<40 %
≥40 %
40–59
<12 %
<22 %
<36 %
<41 %
≥41 %
≥60
<14 %
<24 %
<37 %
<42 %
≥42 %
Gender
Hydration in %
Low
Standard
High
Male
<50 %
50–65 %
>65%
Female
<45 %
45–60 %
>60%
Note:
The above provided information is only a reference. The
measurement of body fat values on children younger
than 17 years of age and persons older than 70 years of
age is only recommended as a reference for monitoring
development.
RESETTING THE SCALE
Reset the scale whenever you need to delete the collected
measurements. This will return the scale to its factory settings. The reset
will delete user data and enable new data to be entered.
1.
Simultaneously press and hold down buttons
▲
and SET.
2. Then release button
▲
and press button
▼
.
3. The display will show "Elr", which means that the scale was
successfully reset.
WEIGHT UNIT SELECTION
• Weigh unit toggle switch is located on the bottom part of the scale.
Press it repeatedly to select kg or lb/st.
Note:
1 kg (kilogram) = 2.2 lb (pounds)
1 lb (pound) = 0.454 kg (kilograms)
1 st (stone) = 14 lb (pounds) = 6.35 kg (kilograms)
OVERVIEW OF MESSAGES SHOWN ON THE DISPLAY
"oooo" – the body parameter analysis process is running. Stand still on
the scale and wait until the weighing and analysis process finishes.
"Lo" – batteries are almost flat and it is necessary to replace them.
"Err" – the maximum weighing capacity was exceeded. Step off the scale
to prevent damaging it.
