EN-8
EN
Stand Mixer
SBL 5370WH / SBL 5371BK / SBL 5372RD
2016
08/2016
4. Connect the power cord to the power socket and set the speed dial A
9
to the required speed
level. We recommend first setting a slower speed to allow the ingredients to mix together. Then
set a higher speed as needed. While blending, always use your hand to hold down the lid A
2
from
above. The pulse level is appropriate when you wish to briefly blend ingredients at the highest
speed. To start the pulse level, press with switch A
8
and hold it down as long as you want to blend
at the highest speed. Once you release the switch A
8
, the pulse level automatically switches off.
note:
The pulse switch A
8
is functional even though the speed dial A
9
is set to OFF.
attention:
The maximum operating time is 2 minutes. Do not leave the appliance in continuous operation
for longer than indicated above. Then allow the appliance to cool down for 2 minutes. When
processing hard food or liquids with a very thick consistency, do not leave the appliance in
continuous operation for longer than 1 minute.
5. After removing the lid insert A
1
, you can add food or fluids into the blending jar A
4
while
blending. To remove the lid insert A
1
, turn it counter-clockwise and take it off. The lid insert A
1
can also be used as a receptacle for adding ingredients.
6. In the event that food is sticking to the blade assembly A
6
or the walls of the blending jar A
4
,
turn the appliance off by turning the speed dial A
9
to position OFF and disconnect it from the
power socket. Make sure that the blade assembly A
6
has stopped rotating. Carefully remove the
assembled blending jar from the motor unit A
0
. Take off the lid A
2
and using a plastic spatula,
clean the blade assembly A
6
and the walls of the blending jar A
4
. Put the lid A
2
back on and
reattach the blending jar to the motor unit A
0
. Plug the power cord into a power socket and
continue blending.
7. After you have finished using the appliance, set the speed dial A
9
to position OFF and disconnect
the power cord from the power socket. Check that the blade assembly A
6
has stopped rotating
and take the blending jar off the motor unit A
0
. Use a soft plastic spatula to remove ingredients
from the blending jar A
4
.
8. Disassemble the blending jar according to the instructions contained in the chapter Assembling
and disassembling the appliance, and clean it according to the instructions in the chapter Cleaning
and maintenance.
aDvICe anD TIPs foR blenDInG
•
First cut food with a firm consistency such as fruit and vegetables into smaller pieces measuring
2 to 3 cm and only then blend it.
•
First blend a smaller amount of ingredients and gradually add the remaining ingredients through
the opening in the lid A
2
while blending. In this way, you will achieve better results than by
adding all ingredients into the blending jar A
4
at once.
•
If you need to blend food of a solid consistency together with liquids, we recommend that you
first blend the food with a smaller amount of the liquids. Then gradually add the remaining liquids
through the hole in the lid A
2
while blending. While blending, always use your hand to hold
down the lid A
2
from above.
•
To blend very thick liquids, we recommend using the pulse level so that the blade assembly A
6
does not get jammed frequently. Start the blender repeatedly in short intervals.
•
Ice cubes must be processed immediately upon being removed from the freezer. When the ice starts
to melt, the ice cubes will stick together and it will not be possible to blend them.
