EN-8
EN
Smoothie Maker
SBL 2200WH / SBL 2201GR / SBL 2202BL / SBL 2203OR / SBL 2204RD /
SBL 2205VT / SBL 2206YL / SBL 2207TQ / SBL 2208RS
2016
02/2016
USING THE APPLIANCE
1. Make sure that the motor unit A
3
is turned off and unplugged.
2. Put the ingredients you want to mix into blending container A
1
or A
7
. We recommend putting
the food into container A
1
or A
7
in the order shown in the chapter “Quick guide to processing
ingredients”. Containers A
1
and A
7
can hold food up to the 600 ml or 300 ml line.Do not put
more food and liquid into container A
1
or A
7
.
Warning:
Before pouring hot liquids into blending containers A
1
or A
7
and blending them, let them
cool to at least 40°C.
3. Assemble the blending container and then attach the blending container assembly to the motor
unit A
3
according to the instructions in the chapter “Assembling and dismantling the appliance”.
4. Plug the power cable in and press the pulse switch A
4
to start the smoothie maker. Press and hold
switch A
4
for as long as you want to mix. To turn the smoothie maker off, let up on switch A
4
.
Warning:
The maximum operating time is 2 minutes. Do not let the appliance run continuously longer
than the time indicated above. Then let the appliance cool for 2 minutes. When processing
thicker foods or liquids, do not let the appliance run for more than 1 minute.
5. If food sticks to the blade unit A
2
or to the wall of the blending container A
1
or A
7
, turn the
appliance off and unplug it. Make sure that the blade unit A
2
has stopped turning. Remove
the container set from the motor unit A
3
and turn it so that the blade unit A
2
points upward.
Remove the blade unit A
2
. Use a plastic spatula to clean the blade unit A
2
and wall of container
A
1
or A
7
. Put the blending container together and attach it back to the motor unit A
3
. Plug the
cord in and continue blending.
6. After blending is finished, unplug the power cable. Make sure that the blade unit A
2
has stopped
turning, and remove the blending container assembly from the motor unit A
3
.
7. Turn blending container A
1
or A
7
so that the blade unit A
2
points upward. Remove the blade
unit A
2
and, if necessary, close bottle A
1
or A
7
with the lid A
6
or pour the contents into
another appropriate container.
8. Clean all parts used according to the instructions in the chapter “Cleaning and maintenance”.
