Wall Mounted Split Air Conditioner
SAC 0910C / SAC 0922CH
EN
EN-15
12/2011
Copyright © 2011, Fast ČR, a.s.
ILLUSTRATION OF THE INSTALLATION
Indoor unit
H
min. 105 mm
min. 155 mm
min. 250 mm
min. 20 mm
Marking out the installation
location using the mounting
plate of the indoor unit.
The connecting pipe may
lead from the rear, the right,
the left or below the rear
side.
right side
front side
bottom
rear
left rear side
left
side
Note:
The drain hose must not
be elevated too high.
When installing the pipe on
a thin board or on a wall
from metal mesh it is
necessary to place a wooded
board between the wall
and the pipe and to wrap
the pipe with 7
–
8 layers of
insulating tape.
The connecting pipe must
be wrapped in a thermally
impervious material.
Soft plastic thermally
impervious material,
thickness 8 mm.
Outdoor unit
I
min. 500 mm
min. 300 mm
min. 500 mm
min. 500 mm
min. 300 mm
