8. Network
Click "Network" to enter the network settings (you can set
the Dev. Name, ETH, WiFi, Port No. Net PWD, Server IP, Server
Port, Push Server IP, Push Server Port, Real Time Req., NTP
Address).
4
www.nordencommunication.com
When you need to start real-time monitoring, you must set the
corresponding "Server IP" and "Server Port", and open "Real
Time Req.".
(1) ETH: Click "ETH" to enter the Ethernet setting interface, and
select “Enable” (default Ethernet is open), then configure the
IP Address, Net mask, and Gateway according to the actual
network environment.
(2) Wi-Fi: Click "Wi-Fi" to enter the wireless network setting
interface, select "Enable" to turn on the wireless network
communication function, then select automatic acquisition
or manual setting of IP, enter "Search", select the WiFi signal
to connect to, and enter the password to connect to wireless
The internet.
