Sencor 43FS601TCS, User Manual

Page: 18 / 34

16 EN
EN
Revision 11/2020
Copyright © 2020, Fast ČR, a. s.
Menu
6.4.1. Channel Scan
Make sure that you selected the DTV source. Next, select the country to set the reception
systems.
Country – select from the available countries the one which best suits your location.
Tuner Mode
– select terrestrial (Antenna) or cable (Cable) or satellite (Satellite) according
to your reception.
• Antenna/Cable
Automatic Search
– select if should be tuned digital DTV, analogue ATV or both.
OK
– starts searching the whole bandwidth and informs you of the found channels and
programs.
• Other selections are applicable only for cable reception:
Modulation
– select Auto or Type QAM according to the operator information.
Frequency
– select Auto or Manual according to the operator information.
Symbol rate – select Auto or Manual entry according to the operator information.
Manual, Analogue, Digital
Use buttons
◄
/
► Channel
intended to search for a program. The demodulation stripe
indicator will let you know about the presence of a broadcast on this channel and how
to find programs on it. Press
▼
to go to
Search
and press
OK
. The found programs are
saved in your list, or the new search will overwrite those already present in your list.
Satellite reception (DVB-S/S2)
Make sure that you selected the reception source DVB-S (
Tuner mode – Satellite
).
Satellite setting
ALERT:
Have a professional install your satellite antenna to ensure you get quality and
uninterrupted reception. The professional will inform you about the technical
parameters (in particular DiSEqC), which he used during the installation process
and which shall be entered into the TV receiver for a successful tuning process.
• Auto Search
Depending on the set parameters press OK to scan.
• Manual satellite tuning
Correctly determine the received satellites and assign them to DiSEqC. You can select
a transponder to control the received signal (e.g. Astra 3/23,5° E, 12070 GHz, horizontal,
27500 kSym/s). Also set the other satellite reception-specific parameters according to the
installation that the antenna installer tells you.
• Scan Mode
Select for search a mode among
Default/Network Scan/Blind Scan/Fastscan
.