6
EN
Applications
Tying of re-bars used for: prefab. concrete elements,
on-site concrete constructions, floors and walls.
Tying of floor heating pipes.
Safety features
To increase safety when tying, the rebar tying tool is
equipped with safety features.
WARNING!
Before use, make sure that the
device works as intended. Otherwise, do not
use the rebar tying tool.
Trigger lock
The rebar tying tool is equipped with a trigger lock.
Lock the trigger and remove the battery when the
rebar tying tool is not in use.
!
Trigger
Trigger lock
When you start tying, release the trigger lock by
pushing the lock left and upwards.
Curl guide
If you pull the trigger while the curl guide is open, the
rebar tying tool will make a warning sound and refuse
to tie. To start tying, release the trigger and make
sure that the curl guide is closed�
Battery
Durability of the battery
If the battery is fully charged, but the operating time
is significantly reduced, the battery is defective and
must be replaced. If the battery temperature is low
(10°C or lower) the charging time will be prolonged�
WARNING!
Do not use defective batteries.
The rebar tying tool will not work properly.
!
Curl guide
Machine specification
Technical info.
SRT25
SRT40
SRT58
Article no�
9VS2003N
9VS2002N
9VS2004N
Weight
2�5 kg
2�6 kg
2�8 kg
Size (L × B × H)
281 × 109 × 300 mm
297 × 109 × 300 mm
312 × 109 × 310 mm
Wraps per tie
2 or 3
2 or 3
2 or 3
Workpiece thickness
8 - 25 mm
12
- 40 mm
30 - 58 mm
Ties per charge
+5�000 (3 wraps)
+4�500 (3 wraps)
+4�000 (3 wraps)
Battery
18V 4,0Ah Li-ion
Charger
Use only approved battery charger (VB0153EU).
Charging time
Full charge = 90 min�
Sound pressure level (Lpa) dB
68,1
Sound power level (Lwa) dB
79,1
Vibration level m/s2
1,5
Wire specification
Model
Box: 20 coils (08A20)
Box: 40 coils (08A40)
Diameter
0�8 mm
Length
approx. 100 m
Material
Galv�
Ties per coil
SRT25
SRT40
SRT58
2 wraps
approx. 220
approx.
160
approx. 120
3 wraps
approx. 160
approx.
120
approx. 90
