![SENBITEC DEESSE PREMIUM SBT-MLLT-PM User Manual Download Page 6](http://html1.mh-extra.com/html/senbitec/deesse-premium-sbt-mllt-pm/deesse-premium-sbt-mllt-pm_user-manual_1238049006.webp)
11
CONTROLLER
INSTRUCTIONS FOR USE
1. Deesse operation
4) Put on the eye guard and then, the mask.
Adjust the strap to make sure that the
mask is placed properly on your face.
5) Press the power button for 2~3
seconds to turn on the device.
1) Gently wipe out the mask clean before use.
2) Connect the power cable to the controller.
3) Connect the mask cable to the controller.
Power On/Off, Start, Pause
Press the button for 2~3 seconds to turn on/off the power.
Set the mode first and press the button shortly to start the operation.
If you wish to pause the operation, press the button shortly.
Intensity Control
Press to select the intensity of light.
The intensity will change from 1 to 2 each time you press the button.
Mode setting
Press the button to set the mode.
It will change from M01 to M08 each time you press the button.
/ Time Control
Press / button to change the time in 5-minute interval.
(except Mode 7 and 8)
Mask Cable
Connect the cable from the mask into .
Power Cable
Connector for adapter.
Intensity Control Display
Shows intensity of the light.
LED Display
Shows the mode of operation.
Action Display
Lighted when the product is in operation.
Operation Time
Shows the time set before operation and remaining time during operation.
6) Press button to set the mode. The
mode will change each time you press
the button and shown on the LCD
display. (Mode 1 to Mode 8)
7) Set the time for each mode by pressing
the Up/Down button. /
Changes in 5-minute interval and up to 60 minutes.
Recommended time for each mode is 15 minutes per application.
For Mode 7 and 8, the time is set to 15minutes and will turn off automatically
once the time is up.
9) After setting mode and time, press the
power button shortly to start the
operation. Then “RUN” will appear on
the LCD screen.
※
If kept in pause for more than 10 minutes, it will turn off automatically.
8) If you wish to adjust light intensity, press button.
10) The controller will turn off automatically
once the time is up.
11) If you wish to pause, press the power
button shortly
10
Summary of Contents for DEESSE PREMIUM SBT-MLLT-PM
Page 9: ......